Page 1
Imported by: Adexa Direct Limited Unit 1 Swift Point, Cosford Lane, Swift Valley Industrial Estate, Rugby, CV21 1QN, UK INSTRUCTION MANUAL service@adexa.co.uk T:+44 1788 222 410 DISPLAY COOLER SC80B Please read this manual carefully, and make sure to keep this manual in the...
Page 2
The light is burned Light is not on Replace the light Caution: Dismantling the unit by non-professional staff is prohibited, it will cause hazard. 2、 Specifications Model SC80B Climatic class Storage Temperature ( ℃) 0~10 Ⅰ Anti-shock protection class Capacity (L)
Page 3
3. Safety Cautions Problems Possible cause Ways to solve problems 1) This unit uses AC220V/60Hz power, there should be a 500va stabilizer if the voltage fluctuation exceed AC198V~242V Disconnect the power supply 2) The user should hold the plug when the power is on/off, dragging or immediately and reconnect pulling the power cord is prohibited.
Page 4
4) After moving the unit, place the unit for 30 minutes before switching it on. 8. Maintenance Running: close the door and connect the power, turn on the lamp switch on the Disconnect the power supply before maintenance for the machine! control panel, the lamp is on.