Table of Contents
Advertisement
Step19:
Make sure that the product is
well
installed.
9. OPERATION INSTRUCTIONS
9.1 DRUM TILTING
The spring-loaded tipping wheel with locking lugs provides an easy positive
control of the drum which can be locked in the mix, discharge and stored
position.
The drum is locked in position by lugs on the self-locating tipping wheel which
engage into the locking plate on the mixer frame. To tilt the drum, withdrawn the
tipping wheel to dis-engage the locking lugs. This then allows the tipping wheel
and drum to be turned in the same direction.
To retain the drum in position, aligning the lugs with the slots, release the
tipping wheel a little while retaining the drum. Rotate the tipping wheel until the
locking lugs engage into the locking plate on the mixer frame.
9.2 LOADING/ MIXING POSITION
For Mortar
For Concrete
Emptying Position
Storage Position
15
Advertisement
Table of Contents
