DDRH Ultra Wide Input DIN Rail Type DC-DC Converter
Type:
DDRH-60-5
DDRH-60-12
DDRH-60-24
DDRH-60-48
DDRH-120-12
DDRH-120-24
DDRH-120-32
DDRH-120-48
DDRH-240-12
DDRH-240-24
DDRH-240-32
DDRH-240-48
Introduction
DDRH series is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation , ultra
wide input voltage, wide range operating temperature, DC OK relay contact and full protective functions...etc.
DDRH-60 series has ultra-high input voltage: 150~1500Vdc and various output options: 5V / 12V /24V / 48V.
DDRH-120/240 series has ultra-high input voltage: 250~1500Vdc and various output options: 12V / 24V /32V / 48V.
DDRH series is suitable for industrial automation, surveillance, telecommunication and can be widely deployed in
the applications of new energy generation such as solar power, and windmill power generation, for instances,
photovoltaic power systems, high voltage inverting and so forth.
Installation
(1)Always allow good ventilation clearances, 5mm left and right, 40mm above and 20mm below, around the unit
in use to prevent it from overheating. Also a 10-15 cm clearance must be kept when the adjacent device is a
heat source.
(2)The appropriate mounting orientation for the unit is vertical, the input terminals at the bottom and output on
the top. Mounting orientations other than that, such as upside down, horizontal, or table-top mounting, is not
allowed.
(3)Use copper wire only, and recommended wires are shown as below.
Rated Current of Equipment
Cross-section of Lead(mm
Note:Current each wire carries should be de-rated to 80% of the current suggested above when
using 4-6 wires connected to the unit.
Make sure that all strands of each stranded wire enter the terminal connection and the screw terminals are
Installation Manual
INPUT: 150~1500VDC
INPUT: 150~1500VDC
INPUT: 150~1500VDC
INPUT: 150~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
INPUT: 250~1500VDC
AWG
(Amp)
2
)
OUTPUT: 5V 10A
OUTPUT: 12V 5A
OUTPUT: 24V 2.5A
OUTPUT: 48V 1.25A
OUTPUT: 12V 8.4A
OUTPUT: 24V 5A
OUTPUT: 32V 3.75A
OUTPUT: 48V 2.5A
OUTPUT: 12V 16.7A
OUTPUT: 24V 10A
OUTPUT: 32V 7.5A
OUTPUT: 48V 5A
20
18
5A
7A
0.5
0.8
16
14
10A
15A
1.3
2.1
Need help?
Do you have a question about the DDRH-120-12 and is the answer not in the manual?
Questions and answers