Snow Mode; Baby Mode 1/Baby Mode 2 - Panasonic Lumix DMC-LZ3 Operating Instructions Manual

Advanced
• The optical image stabilizer function is
fixed to [OFF].
• ISO sensitivity is fixed to [ISO80].
• You cannot compensate the exposure or
set [AUDIO REC.] (DMC-LZ5), auto
bracket, burst mode.

Snow mode

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P49)
This mode allows you to take a picture in
locations such as skiing resorts and
locations near snowy mountains. The
exposure and the white balance are
adjusted to make the white color of the
snow stand out.
1 Baby mode 1/
Baby mode 2
2
MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P49)
This mode takes pictures of a baby with a
healthy complexion. When the flash is
used, the light from it is weaker than usual.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
• The baby's age can be displayed when
playing back pictures.
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] in the CD-ROM (supplied).
(For information about printing, refer to the
separate operating instructions for PC
connection.)
∫ Age display setting
• If you want the age to be displayed, set
the birthday in advance, select
[WITH AGE] and press [MENU/SET].
54
VQT0U87
• If you do not want the age to be displayed,
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
2 When the message [PLEASE SET THE
3 Press [MENU/SET] to finish the setting.
• If you select [WITH AGE] without setting
3
• The focus range becomes the same as
• After turning on the camera in [BABY1]/
• The age display style differs depending on
• The display style when printing may differ
• The date of birth is displayed as
• If the age is not properly displayed, check
• If the camera is set to [WITHOUT AGE],
select [WITHOUT AGE] and press
[MENU/SET].
1
3
9 10
months days
10:00 DEC. 1.2006
and then press [MENU/SET].
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
2/1 and set them using 3/4.
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ¶]
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
the language setting in the recording
mode.
slightly from the display style on the
screen.
[0 month 0 day].
the clock and birthday settings.
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even the camera is
1
BABY1
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL SELECT SET MENU