[Protect]; Preventing Accidental Erasure Of Pictures - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

• DPOF print setting is a convenient
function when printing pictures with a
printer that supports PictBridge. The date
printing setting on the printer may take
priority over the date printing setting on
the camera. Check the date printing
setting on the printer also. (P115)
• It is necessary to delete all previous
DPOF print information made on other
equipment when setting DPOF print on
the camera.
• If the file is not based on the DCF
standard, the DPOF print setting cannot
be set. DCF is an abbreviation of "Design
rule for Camera File system", stipulated by
"JEITA (Japan Electronics and Information
Technology Industries Association)".

[PROTECT]

Preventing accidental erasure of
pictures
MENU
Press [ ] to display the [PLAY] mode
SET
menu and select the item to set. (P102)
You can set protection for pictures you do
not want to be deleted by mistake.
Press / to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
2
PLAY
SINGLE
PROTECT
MULTI
AUDIO DUB. OFF
CANCEL
RESIZE
TRIMMING
ASPECT CONV.
MENU
SELECT SET
Single setting
1 Press
and then press
[SET]
[CANCEL] The protect icon [
2 Press [MENU/SET] twice to close
the menu.
Multi setting/To cancel all settings
Perform the same operation as in
"[DPOF PRINT] Setting the picture to print
and the number of prints". (P105 to 107)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
/
3
• Even if you protect pictures on a card,
they will be deleted if the card is
formatted. (P111)
ON
• Even if you do not protect pictures on an
MENU SD Memory Card or SDHC Memory Card ,
SET
they cannot be deleted when the card's
write protect switch
• The following functions cannot be used
with protected pictures.
– [ROTATE]
– [AUDIO DUB.]
Menu Settings
/ to select the picture
to set/cancel.
PROTECT THIS
100 _ 0001
1/3
SELECT
SET/CANCEL EXIT MENU
The protect icon [ ]
appears.
]
disappears.
is set to [LOCK].
32
107
VQT0X92