[Sensitivity] - Panasonic Lumix DMC-FX75 Operating Instructions Manual

Advanced features
Table of Contents

Advertisement

For details on [REC] Mode menu settings, refer to P23.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher number
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/
/[80]/[100]/[200]/[400]/[800]/[1600]
[
]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
ISO sensitivity
AUTO
(Intelligent)
80/100/200/400/800/1600
∫ About [
] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400]
according to the brightness. (It can be adjusted to a maximum of [ISO1600] when using the
flash.)
When setting to [
the maximum setting of [ISO1600].
The ISO sensitivity will be set to [AUTO] when recording motion pictures. Also,
[ISO LIMIT SET] will not work.
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Refer to
P59
for the flash range.
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
] is selected.
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
The setting is fixed to [
In [SPORTS], [BABY1]/[BABY2], [PET] and [FLASH BURST] in Scene Mode
To avoid picture noise, we recommend that you either reduce the ISO sensitivity level or set
[COLOR MODE] to [NATURAL], and then take pictures.
Advanced (Recording pictures)

[SENSITIVITY]

·
When it is light (outdoors)
The ISO sensitivity is automatically adjusted according to the
brightness.
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
The ISO sensitivity is fixed to various settings.
], ISO sensitivity will adjust automatically depending on brightness within
] in the following cases.
80
Slow
Less
Settings
(P116)
- 106 -
1600
When it is dark
Fast
Increased

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-fx75k

Table of Contents