Removing And Installing A Memory Module; Memory Population Table - Gigabyte E283-S90-AAD1 User Manual

3-6-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. Be sure to install DDR4 DIMMs on
to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.

3-6-3 Memory Population Table

Type
RDIMM
RDIMM 3DS
2
DIMM
Ranks Per DIMM
Capacity
and Data Width
16Gb
SRx8 (RC D)
SRx4 (RC C)
SRx4 (RC F) 9x4
DRx8 (RC E)
DRx4 (RC A)
DRx4 (RC B) 9x4
(4R/8R)x4 2H-128GB
(RC A) 4H-256GB
*1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
System Hardware Installation
1
Speed (MT/s); Voltage (V);
DIMM per Channel (DPC)
(GB)
1DPC*
16GB
32GB
32GB
32GB
4800
64GB
64GB
- 34 -
2
2DPC
1.1V
4400