Table of Contents
Advertisement
Assembly (continued)
5
Tightening the bolts
Put the stool on a level surface and
tightened with Allen wrench. Tighten all the bolts on a level surface.
If the stool legs are not on the oor:
NOTE:
You can
adjust levelers properly (on the bottom of the legs).
You may need to loosen the bolts. Apply some weight on
the table to get all legs on the oor, and then tighten the
bolts at that positon.
fully tighten all bolts previously
6
Advertisement
Table of Contents
Need help?
Do you have a question about the HAMRICK BC9333C and is the answer not in the manual?