Table of Contents
Advertisement
18
www.aeg.com
8.4 Úspora času
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
This option can also be used
to shorten the Pára
programme duration.
8.5 Teplota
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator
temperature comes on (the appliance
does not heat the water).
8.6 Odstřeďování
When you set a programme, the
appliance automatically selects the
maximum spin speed. The display shows
only the spin speeds available for the set
programme.
Touch this button repeatedly to:
• Decrease the spin speed.
• Activate the Rinse Hold option .
The water of the last rinse is not
drained out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum and the
final spin phase is not performed.
The display shows the indicator
The lid stays locked. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the lid.
Touch Start/Pauza button: the
appliance performs the spinning
phase and drains the water.
• Activate the Extra Silent option.
All spinning phases (intermediate spin
and final spin) are suppressed and
.
= cold water of the set
the programme ends with water in the
drum. This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programmes the
rinses are performed with more water.
The display shows the indicator
The lid stays locked. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the lid.
Touch the Start/Pauza button: the
appliance performs only the draining
phase.
The appliance empties
the water out
automatically after
approximately 18 hours.
• Activate the Pouze vypouštění
option (Skipping the wash, rinse
and spin phases) .
The appliance performs the only
draining phase of the selected
washing programme.
The display shows the indicator
(cold), and the indicator
spin) and the indicator
• Activate the Pouze odstřeďování
option (Skipping the wash and rinse
phases) .
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator the spin
speed.
If it is necessary to
reduce the spin speed,
select a programme with
a lower spin speed as
default.
.
8.7 Skvrny/Předpírka
Press this button repeatedly to activate
one of the two options.
• Skvrny
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
.
(no
.
Advertisement
Table of Contents
