Campania International LED-KIT3 Assembly Instructions

Step 1 - Connect the light (LED-LIGHT) to the 3-meter extension cord (LED-Cord) and seal the
connection with cover already installed onto the longer light cord.
Step 2 - Every light has a long cord and a short cord attached. Unscrew the cap from the short
cord.
Step 3 - Connect a second light's (LED-LIGHT) longer cord to the small cord on the first light.
Seal the connection with cover already installed onto the longer light cord.
Step 4 - Unscrew the cap from the short cord of the second light.
Step 5 - Connect a third light's (LED-LIGHT) longer cord to the small cord on the second light.
Seal the connection with the cover already installed onto the longer light cord.
Step 6 - Ensure that the end of the smaller cord on the third light has the water-tight screw cap
installed securely.
Step 7 - Install the lights and cord into the fountain. Ensure that the extension cord extends out of
the fountain.
Step 8 - Attached the loose end of the extension cord to the transformer (LED-TRANS) and seal
the connection with cover already installed onto the extension cord.
Note: Extra Lights can be purchased to extend the chain. Campania does not recommend using
more than 5 lights per transformer.
LED-KIT3 - Three LED Light Kit
Image
Assembly Instructions
Assembly Instructions
Light Kit Parts List
Component
LED-LIGHT
LED-Cord
LED-TRANS
Quantity
3
1
1
rev 7/22/2022