Related Manuals for Difrnce PDVD9010 TWIN
Summary of Contents for Difrnce PDVD9010 TWIN
- Page 1 PDVD-16309P2 ENGLISH MANUAL 主机MTK-1389QE 副机MST-702 不带红外功能 不带电池 模拟屏 PORTABLE DVD USER'S MANUAL PDVD9010 TWIN Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
-
Page 2: Important Safety Instructions
Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove WARNNING: Excessive sound pressure from earphones or the cover or back. There are no user-serviceable parts headphones can cause hearing loss. inside. Refer servicing to qualified personnel. WARNNING: Only use attachments/accessories specified Warning: To prevent fire or electric shock hazard, do not provided by the manufacturer, the portable DVD is supplied... -
Page 3: Safety Precautions
Safety Precautions Notes on Copyrights: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without Warning: This digital video disc player employs a laser system. permission. - Page 4 Identification of Controls Main Unit MASTER TFT SCREEN 1.SD/MS/MMC 2. POWER ON/OFF 3. HEADPHONE OUT JACKS 4. VIDEO/AUDIO OUT 5. COAXIAL 6.USB 7. DC OUT 8. DC IN 9-12V 9. ENTER 10. UP/DOWN/LEFT/RIGHT 11. SOURCE 12. UP/DOWN 13. MODE Slave TFT menu setting. SLAVE TFT SCREEN 14.
- Page 5 Identification of Controls Remote control unit 5.10+ BUTTON In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button. STEP MUTE SOURCE 6. MENU/PBC Return to DVD root menu(DVD). PBC on/off switch (VCD) .
- Page 6 Identification of Controls Remote control unit BUTTON 25.SLOW Press BUTTON allow skipping back at 5-level speed(X2->X4-> Press Slow button repeatedly to enter slow playback, and cycle X8->X16->X32 -> PLAY), press PLAY button return to normal between different speeds. The speeds are 1/2,1/4,1/8,1/16,and playback.
-
Page 7: Setup Menu Setting
Setup Menu Setting General Setup Page Press SETUP button to get the setup menu. Use direction buttons Angle Mark Displays current angle setting information on the right hand corner to select the preferred item. After finishing settings, press of the TFT screen if available on the disc. SETUP again to normal display. -
Page 8: Video Setup Page
Setup Menu Setting Audio Setup Page Video Setup Page Video Setup Page Downmix This options allows you to set the stereo analog output of your DVD Player. - - VIDEO SETUP PAGE - - LT/RT :Select this option if your DVD Player is connected to a Dolby Pro Logic decoder. -
Page 9: Password Setup Page
Setup Menu Setting Preference Page Password Setup Page Password: select the menu password change page. PAL - Select this if the connected TV is PAL system.It change will video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format. -
Page 10: Picture Page
Slave TFT Menu Setting Electronical parameters Picture Page Standard requirement Item Power requirements : AC 100-240 V , 50/60 Hz PICTURE Power consumption : <15W BRIGHT CONTRAST Operating humidity : 5 % to 90 % COLOR ENGLISH VIDEO OUT RESET AUDIO OUT :1.0 Vrms (1 KHz, 0 dB) :Speaker:1WX2,... - Page 11 www.difrnce.nl...
Need help?
Do you have a question about the PDVD9010 TWIN and is the answer not in the manual?
Questions and answers