SterileFLAT KB600 User Manual

Package List

Keyboard ------------------------------------------ 1pcs
Receiver ------------------------------------------- 1pcs
User Manual -------------------------------------- 1pcs

System Support

Windows10/8/7/win2000/XP/Visa/Linux/Android/IOS etc.

Before use:

1. Find the wireless keyboard and receiver in package
2. Plug receiver to USB port on PC, it will install the driver at around 10s;
3. Switch the button at the bottom of keyboard body, battery cover can be open. Open
the battery cover of the keyboard;
4. Install 2pcs AAA batteries (make sure its Positive and negative are correct), keyboard
will connect the receiver automatically;
5. Put on power switch at the bottom of keyboard, LED indicator will keep flash for few
seconds. Close the battery cover, the keyboard is ready to work.
Remark: Only AAA battery is available

Reconnection

Both of keyboard and receiver has a built-in code, It can be setting one keyboard to one
receiver, or few of keyboard to one receiver. Keyboard and receiver need to reconnect
under the condition of High temperature, high magnetic, strong vibrate.
1. Plug off the receiver from USB port, and plug it on
2. Move RF keyboard within 50CM to receiver, re-install the battery, Press any key to
Sterileflat AMK Ltd
Rainbow House 45 Madingley, Bracknell, Berkshire, RG12 7TF, UK
KB600 Wireless Keyboard
User Manual
Tel No: 0044-01344 648599 www.sterileflat.com
1