Advertisement
Quick Links
Advertisement
Summary of Contents for Medequip med-e Move MEEWC01
- Page 1 ELECTRIC WHEELCHAIR Model: MEEWC01 User Manual...
- Page 2 Preface Please read the user manual carefully before taking the product into use. This manual contains operations, assembly methods, and simple faults solutions. This manual applies to our models: MEEWC01. This manual contains wheelchair maintenance and self checking methods, please put it in proper ...
-
Page 3: Product Introduction
1 Product Introduction 1.1 Product Image 1.2 Product Information Performance Parameters MEEWC01... -
Page 4: Safety Instructions
Product Performance This series of electric wheelchairs are powered by battery, driven by DC motor. Users control direction and adjust speed by joystick controller. It is suitable for application of low speed, good road condition and small slope. Main Structure This series of electric wheelchairs are mainly composed of two parts: 1) Frame Part: frame, wheel, footrest, armrest, backrest etc. - Page 5 2.2 Other Notice Repair and Reform If the repair and modification is necessary, please contact your dealer. Do not modify by yourself, it may lead to accident or malfunction. Protect Environment In order to protect environment, do not casually discard the abandoned wheelchair and scrapped battery.
- Page 6 Adjustment of Joystick Adjust the controller to perfect position by screwing the nut counterclockwise (picture 3). Screw tight the nut when adjustment is done. Picture 3 Assemble and Dissemble the Footrest Install the footrest into the frame tube, and move from outside to medial to the fixed position; For disassemble, push the plastic part to outside then lift up footrest (picture 4).
-
Page 7: Battery And Charger
4 Battery and Charger 4.1 Charger Requirements The charger is used for battery charging. During electric wheelchair is charging, do not use it. Charger Technical Data ± Input voltage: AC 220V (100V) Output voltage: 24V/DC Output current: 4A 4.2 Usage of Charger In order to charge the battery, connect the charger with power supply and battery box’s plug. - Page 8 5 System Diagnose When the indicator LED lights are blinking, it means the wheelchair has abnormalities. The abnormalities may occur in following parts: motors, brakes, battery, wire connections, etc. Through the product’s inner information consultation, the property of the abnormal condition can be detected by the diagnosis signal.
- Page 9 6 Controller 6.1 Controller Panel Battery Power Gauge Power On/off Horn Button Speed Speed Increase Speed Decrease 6.2 Controller Usage Power Switch Press this button, the battery power gauge lights will turn on from left to right. Press again, all the LED lights are off. In some emergency, you can directly turn o power by press power button.
-
Page 10: Maintenance
part is malfunction, do not use it and contact with your dealer for maintenance. 7 Maintenance Maintenance of wheelchair includes clean wheelchair, check wheel and battery, and charge battery. For further maintenance please contact with your dealer. Our suggestion is checking the wheelchair every half year, annually overhaul. - Page 11 No signal output or input part. Non-permanently installed equipment. Customer care & Registered office address: C – 79, 2nd stage, Peenya Industrial Estate, Bangalore 560058, Karnataka, India. Customer care phone number: +91(0)80 28362444 Customer care email: customersuppor t@medequip.co.in Website: www.medequip.co.in...
Need help?
Do you have a question about the med-e Move MEEWC01 and is the answer not in the manual?
Questions and answers