Advertisement
Quick Links
WAHSON
HS-019B-200BK Drafting Stool
User's Manual
1
Contents
connecting tube
back(x1)
(x1)
foot rest
seat cushion(x1)
(x1)
gas lift(x1)
caster
(x5)
A
(x4)
B
(x2)
Assembly Instructions
1
Press the casters into the holes at the end of
each base leg.
Remove the black cap on the top of gas lift,
then insert the gas lift into the center hole of
the star base.
back
plastic cover
connecting plate
(x1)
(x1)
seat plate
star base
(x1)
(x1)
glide(x5)
*alternative part to caster
allen wrench(x1)
C
hand knob(x1)
D
2
Attach the foot rest to the gas lift and tighten
the hand knob to lock it into position. Make
sure the gap of the rubber ring is at opposite
side of the screw hole.
2
Advertisement
Related Manuals for WAHSON HS-019B-200BK
Summary of Contents for WAHSON HS-019B-200BK
- Page 1 WAHSON Contents HS-019B-200BK Drafting Stool User’s Manual back plastic cover connecting plate connecting tube back(x1) (x1) (x1) (x1) foot rest seat plate star base seat cushion(x1) (x1) (x1) (x1) gas lift(x1) caster glide(x5) (x5) *alternative part to caster allen wrench(x1)
- Page 2 Easy adjustment instructions Attach the seat plate to the seat Assemble the back. cushion. Seat height adjustment Sitting in the seat, pull up on the lever on the right side of the seat. Lower or raise the seat to your desired height, then release the lever to lock the seat height into position.