Table of Contents
Advertisement
Parameter
Device reset time-out
Device power-up delay
Mass Storage Devices
Description
Selects the time-out value during a USB mass storage device reset.
Options available: 10 sec, 20 sec, 30 sec, 40 sec.
Default setting is 20 sec.
Maximum time the device will take before it properly reports itself to the
Host Controller. "Auto" uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from Hub descriptor.
Options available: Auto, Manual. Default setting is Auto.
Displays the mass storage devices available on the system.
BIOS Setup
- 78 -
Advertisement
Table of Contents
