Table of Contents
Advertisement
Chapter 3 Operation Process
1. Insert plug into socket, switch on power button to "-". The on / off
indicator will light up. Intensity level indicator will display "01",
timer indicator will display "30", and machine will be on standby mode.
2. During standby mode, the intensity level + / - buttons are not allowed
to be adjusted. The working time or duration can be adjusted
by "30 minutes", "20 minutes" and "10 minutes".
Anions and terahertz buttons can be turned on or off according
to personal needs. When anions button is turned on or off,
anions indicator light will be on or off correspondingly;
when terahertz button is on or off, the terahertz indicator light
will be on or off correspondingly.
3. During standby mode, the automatic start function is always
ready. When both feet are placed on energy board, machine buzzes,
the white light of the on / off indicator lights up and starts to work
automatically. During operation, you can adjust your intensity level
through "Level +" and "Level -" button according to your comfort level.
During operation, timer button are not allowed to be adjusted. You can
turn on or turn off the function of anions and terahertz button according
to your needs.
4. During operation, the timer indicator will be decreasing every 1 minute.
When the timer indicator reduced to "01", the machine will stop and
return to standby mode.
5. During operation, if any one of the foot were to leave the energy board,
the machine will be in pause status, the light of on / off indicator will
flash. When both feet step on the energy board again, the machine will
continue working to complete the remaining time.
6. During operation, when terahertz button is turned on, ambient light will
be red; when terahertz button is turned off, the ambient light will be blue.
7. No matter whether the machine is in working or in pause status, the
machine will return to the standby status by pressing the reset key.
4
Advertisement
Table of Contents
