Core ERV Product Information

CORE ERV - General Product Information
Introduction
Congratulations on purchasing your new CORE ERV - Energy
Recovery Ventilation. The exchanger is classed as an
Enthalpy Exchanger. In this system, in addition to the heat that
is recovered from two air currents, the moisture is also
automatically recovered. This takes place via a membrane
inside the ERV and, in addition to exchanging energy, ensures
a comfortable room climate.
The ERV is a component for energy recovery (recuperation)
for ventilation devices that are designed for living spaces. The
ERV is not designed for any other operating mode.
Notes on packaging and shipping
Even though an ERV appears to give the impression of being
robust and sturdy, applying heavy weight to pallets whilst
storing or transporting, especially in combination with high
temperatures, can lead to distortion and damage.
For shipment of larger quantities, it is recommended:
- Pallets with sufficient load capacity
- No stacking over 1.6 m high
- contactless packaging with foil
- securing the ERV on the pallet with a lid (cardboard)
and straps made of polypropylene.
•
For shipment of single ERV, it is recommended:
- A box suitable for parcel shipping
• - Appropriate stabilization as a transport safeguard (e.g.
very coarse (> 10 mm), non-dusting filling material, no
bubble wrap!)
The weight of your ERV varies greatly depending on the type
and height. In the following table you will find the minimum
requirements we recommend for cardboard packaging for
each weight:
Weight Composition
[kg]
2 135TL / 100WS /
100WS
3 120TL / 100WS /
120TL
For more information about our products please visit
us at www.core.life.
We will be pleased to assist you!
© CORE Energy Recovery Solutions GmbH
Corrugation Width
[mm]
1-fluted 4,0
1-fluted 4,0
4 135TL / 100WS /
100WS
5 135TL / 100WS /
135TL
9 120KLw /
100WS / 135TL
9 140TLw /
100WS /
140TLw
14 140KLw /
100WS /
140KLw
14 140KLw /
100WS / 170TL
18 186KL / 140WS
/ 135TL
8 135TL / 100WS /
135TL
9 125KL / 100WS
/ 135TL
8 125KL / 100WS
/ 135TL
14 140KL / 100WS
/ 170TL
14 140KLw /
100WS / 170TL
18 186KL / 140WS
/ 135TL
10 120TL / 100WS /
100WS / 100WS
/ 120TL
23 135TL / 100WS /
100WS / 100WS
/ 135TL
TL = test liner, KL = kraft liner, WS = Fluting
Additional note:
Please contact your cardboard supplier for the exact
composition of the cardboard.
Notes on storage
The temperatures during the entire life cycle of the ERV must
be within the limits of - 20 ° C to + 50 ° C. Otherwise there is
1
1-fluted 2,5
1-fluted 2,5
1-fluted 2,5
1-fluted 2,5
1-fluted 2,5
1-fluted 2,5
1-fluted 2,5
1-fluted 4,0
1-fluted 4,0
1-fluted 1,5
1-fluted 4,0
1-fluted 4,0
1-fluted 4,0
2-fluted 6,5
2-fluted 6,5