Download
Share
Print this page
XLPower Specter 700 V2 Instruction Manual
  1. Manuals
  2. Brands
  3. XLPower Manuals
  4. Toy
  5. Specter 700 V2
  6. Instruction manual

XLPower Specter 700 V2 Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Instruction Manual (NME)
Manual Release 1.0
Always Check http://xlpower-rc.com for the latest version of this manual
Length Without Main Blades:
Overall Height:
Width:
Main Gear:
Pinion Gear:
Motor Shaft Diameter:
Main Gear Ratio:
Front Tail Pulley:
Rear Tail Pulley:
Tail Ratio:
Frame Weight:
Main Shaft Diameter:
Feathering Shaft Diameter:
Tail Boom Diameter:
Tail Belt Width:
Main Gear Thickness:
Battery Compartment Size:
1
1383mm
351mm
217mm
106T Mod 1
11T (10-13T Optional)
6mm (Length 20-55mm)
9.636 (10.6 - 8.38 Optional)
100T
21T (20T Optional)
4.767 (5.0 Optional)
2060g
15mm
10mm
32mm
8mm
18mm
380mm*68mm*70mm

Advertisement

loading

Related Manuals for XLPower Specter 700 V2

Summary of Contents for XLPower Specter 700 V2

  • Page 1 4.767 (5.0 Optional) Frame Weight: 2060g Main Shaft Diameter: 15mm Feathering Shaft Diameter: 10mm Tail Boom Diameter: 32mm Tail Belt Width: Manual Release 1.0 Main Gear Thickness: 18mm Always Check http://xlpower-rc.com for the latest version of this manual Battery Compartment Size: 380mm*68mm*70mm...

  • Page 2: Always Follow These Rules For Safety

    Always Follow These Rules For Safety If you do not observe these instructions, you may be held liable for injury or damage. Operate the helicopter in open areas with no people nearby. Do NOT operate the helicopter in these situations or areas: In places where children gather or people pass through In residential areas and parks Indoors and in limited space...

  • Page 3: Equipment Required For Assembly

    Equipment Required for Assembly Hex Screwdriver Sizes: 1.5mm Swashplate Servos: ESC: 2.5mm * 2 130HV-250HV Typical Standard Size (Qty. 3) 4mm * 2 Where indicated, use Thread lock MEDIUM Main Blades: Tail Servo Carbon Fiber 690mm - 720mm Standard Size (Qty. 1) Trasmitter Tail blades: Receiver/Satellites...
  • Page 4 Clean all screws and threads with isopropyl alcohol (90% HB-1-1 HB-1-1 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Main Blade Grip Specter V2 NME Larger ID ART. XL76H02B Double Row Smaller ID Angular Contact Bearing 10*19*7 ART.
  • Page 5 Clean all screws and threads with isopropyl alcohol (90% HB-1-2 HB-1-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Main Blade Grip Arm ART. XL70H08 Main Blade Grip Arm NME ART. XL70H08B Ball 5mm M3*3 ART.
  • Page 6 Clean all screws and threads with isopropyl alcohol (90% HB-1-1 HB-1-1 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight H e a d D a m p e n e r s ART. XL70H02-3 ART.
  • Page 7 Clean all screws and threads with isopropyl alcohol (90% HB-1-5 HB-1-5 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Ball 5mm M3*12 ART. XL70H11-4 Ball 5mm M3*3 ART. XL70A01 Swashplate (Upper) ART. XL70H11-1B Ball 5mm M3*24 GE15C Bearing ART.
  • Page 8 Clean all screws and threads with isopropyl alcohol (90% HB-1+HB-2 HB-1+HB-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight M4 Nut ART. XL76H04 Screw M4*25 ART. XL76H04 Wraith E F3C / Specter V2 Main Shaft ART.
  • Page 9 HB-1-1 HB-1-1 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Ball Bearing Spacer 3*5*0.5 3*7*3 ART. XL70H09B ART. XL52A12 ART.XL70H09B Pin 3*14 ART.XL70H09B Control arm NME Spacer 3*5*0.5 ART.XL70H09B ART.
  • Page 10 Clean all screws and threads with isopropyl alcohol (90% HB-1-3 HB-1-3 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight 21.5mm Titanium Main rotor linkage ART. XL70H14-1 Ball Link 5mm M3 ART.XL70A02 Right thread Pay attention to the Mark Left thread 39mm...
  • Page 11 Clean all screws and threads with isopropyl alcohol (90% BB-1-1+BB-1-3 BB-1-1+BB-1-3 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Double Row Angular Contact Bearing 15*24*7 ART. XL70B02 Main Shaft Bearing Block ART. XL70B01 Pre Assembled Main Shaft Bearing Spacer ART.
  • Page 12 BB-1-4+BB-4-5+BB-2 BB-1-4+BB-4-5+BB-2 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Aluminum Frame Spacer Hex screw ART. XL70B40 M3*6 (Red in picture) ART. MSH71108 Upper Servo Mount ART.
  • Page 13 Clean all screws and threads with isopropyl alcohol (90% BB-1-2+BB-2 BB-1-2+BB-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Anti-Rotation Bracket ART. XL70B13-1 Canopy Mount (Rear) ART. XL70V2B04 Anti-Rotation Bracket Mount ART. XL70B13-1 Set screw M3*12 ART.
  • Page 14 Clean all screws and threads with isopropyl alcohol (90% BB-1-6 BB-1-6 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Do Not Install This Silver Screw Yet Flat screw M3*4 ART. XL70V2B05 Hex screw M2.5*6 ART.
  • Page 15 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M2.5*6 ART. MSH71110 Hex screw M3*6 ART. MSH71108...
  • Page 16 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M3*6(Red in picture) ART. MSH71108 Hex screw Set screw M3*12 M3*8 (Tiffany Blue in picture) ART.
  • Page 17 Clean all screws and threads with isopropyl alcohol (90% BB-1-7 BB-1-7 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button head screw M3*6 ART. XL70A21 Hex Screw M2.5*10 ART. MSH71103 XL70A03 Servo Horn XL70A04 Optioal: XL70A04-1 Carbon Servo Washer ART.
  • Page 18 Clean all screws and threads with isopropyl alcohol (90% BB-1-7 BB-1-7 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Servo Horn Screw M3x6 ART. XL70A21 Servo horn XL52A19 Carbon Servo Washer 2mm ART. XL70V2A02 Hex screw M2.5*16 ART.
  • Page 19 Clean all screws and threads with isopropyl alcohol (90% BB-3 BB-3 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M2.5*4 DO NOT OVER TIGHTEN ART. XL70B27-1 Battery Tray Rail (R) ART. XL70B28 Center Plate V2 ART.
  • Page 20 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button head screw M3*6 Do not tighten yet ART.XL70A21 Hex screw M2.5*6 Button head screw M3*6 ART. MSH71110 Fully tighten...
  • Page 21 Clean all screws and threads with isopropyl alcohol (90% BB-1-8+BB-4 BB-1-8+BB-4 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Battery Tray Guide (L) ART. XL70V2B09 Button head screw M2.5*6 ART.XL70V2A03 Left Side Tray Guide has threads in holes Lower Carbon Frame V2 ART.XL70V2B10...
  • Page 22 BB-1-8+BB-4 BB-1-8+BB-4 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Quick Release Battery System ART. XL70B42-3 Right Side Tray Guide has no threads in holes Button head screw M2.5*8 ART.
  • Page 23 Clean all screws and threads with isopropyl alcohol (90% BB-1-9+BB-4 BB-1-9+BB-4 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button head screw M3*6 Aluminum Frame ART.XL70A21 Spacer ART. XL70B39 Rear frame Spacer ART. XL70V2B17 Button head screw M2.5*6 DO NOT OVERTIGHTEN ART.
  • Page 24 Clean all screws and threads with isopropyl alcohol (90% BB-1-9+BB-4 BB-1-9+BB-4 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M3*6 ART. MSH71108 Canopy Mount (Front) Button head screw M3*45 ART. XL70V2B18 (Do not tighten yet) ART.
  • Page 25 BB-5 BB-5 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Landing Gear Mount ART. XL70B32 Hex screw M3*10 ART.MSH71099 Pay attention to the direction Landing Gear Strut of landing gear mount ART.
  • Page 26 BB-5 BB-5 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Skid Pipe ART. XL70B35 Grub Screw M3*3 XL70B34-3 Hex screw M3*6 ART. MSH71108...
  • Page 27 BB-1-7 BB-1-7 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M2.5*10 ART. MSH71103 XL70A03 Carbon Servo Washer ART. XL70A03...
  • Page 28 Clean all screws and threads with isopropyl alcohol (90% TB-1-2+TB-1-4+TB-2 TB-1-2+TB-1-4+TB-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Tail Case V2 NME ART. XL70V2T02B Button head screw M3*6 ART.XL70A21 Ball Bearing 6x13x5 Flanged 8mm Tail Belt V2 ART.XL70A06 ART.
  • Page 29 Clean all screws and threads with isopropyl alcohol (90% TB-1-2 TB-1-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Tighten securely, and ensure the grub screw engages with the small recess in the tail shaft Grub screw M4*4 MSH71122 Tapered End Tail Shaft...
  • Page 30 Clean all screws and threads with isopropyl alcohol (90% TB-3 TB-3 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Ball bearing 3*9*4 ART. XL70A20 Spacer 3*5*9.75 ART. XL70V2T06 Rear Belt Idler Pulley V2 ART. XL70V2T06 Hex screw M3*6 ART.
  • Page 31 TB-1-6 TB-1-6 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M2.5*8 ART. MSH71111 Ball 5mm M3*3 ART.XL70A01 Button head screw Tail Pitch Lever Support M3*6 ART.XL70A21 ART.
  • Page 32 Clean all screws and threads with isopropyl alcohol (90% TB-1-5+TB-1-7 TB-1-5+TB-1-7 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Tail pitch assembly ART. XL70T12B Tail Control Link ART. XL52T11 Tail Shaft Slide Bushing ART. XL70T12-1 Loctite is Extremely Important! Tail Pitch Slider Bearing...
  • Page 33 TB-1-1 TB-1-1 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Tail grip NME Thrust Bearing Ball 4.72mm M2.5 ART. XL70T16B 5*10*4 ART. XL70A01 ART.XL70T18 ID Bigger Towards Tail Hub ID Smaller Towards Tail Blade Apply grease on thrust bearing...
  • Page 34 TB-1-1 TB-1-1 Hex screw M4*6 ART. XL70T20 M4 Washer ART. XL70T20 CNC Washer 5*8*1 ART. XL70T19 Tail Damper ART. XL70T15 Tail Spindle ART. XL70T20 Pay attention to the direction of tail grip arms...
  • Page 35 Clean all screws and threads with isopropyl alcohol (90% BB-6 BB-6 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button Head screw M3*14 ART. XL70V2B21 Ball bearing 15*21*4 ART. XL70B21-3 Upper one way hub ART.
  • Page 36 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight 100T Front Pulley ART. XL70V2B12 Turn belt 90 degree CCW...
  • Page 37 Clean all screws and threads with isopropyl alcohol (90% HB-2 HB-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight -Pull up main shaft -Push down shaft collar -Fully tighten M3*12 and M4*4 Hex screw M3*12 Main shaft collar ART.
  • Page 38 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button head screw M3x45 Set belt tension by pulling backwards on the tail boom. Ensure tail tail case is level, then tighten screws.
  • Page 39 Clean all screws and threads with isopropyl alcohol (90% TB-2 TB-2 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Exact length may vary depending on rear tail pulley size Tail pushrod end Apply pressure pushing the end onto ART.
  • Page 40 Clean all screws and threads with isopropyl alcohol (90% TB-1-8 TB-1-8 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Tail Control Rod Guide ART. XL70V2T09 M2*6 ART. XL70V2T09 M2 nut ART. XL70V2T09 Tail Control Arm should be 90 degree angle when servo is centered...
  • Page 41 BB-1-10 BB-1-10 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight 4525-4530 500-550kv motor 6mm shaft (not included) ART. XL70M01 Pay attention to the bearing di- rection(Pre-assembled) Grub screw M4*4 ART.
  • Page 42 BB-1-10 BB-1-10 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Add a small dab of green retaining com- pound(638/648/680/620) to Ball Bearing 8*16*5 outside of pinion to prevent ART.
  • Page 43 BB-1-10 BB-1-10 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Hex screw M3*10 Do not fully tighten yet ART. XL70B05 MSH71114 Use A4 printer paper to set gear mesh at the lowest point, push pinion into gear, then tighten 4...
  • Page 44 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Button head screw M3*6 ART.XL70A21...
  • Page 45 GYRO...
  • Page 46 BB-1-11 BB-1-11 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Flat cap screw M3*6 ART.XL70B12 Rubber Cap ESC Plate ART. XL70B12 Canopy Support Block ART. XL70B10 ART.
  • Page 47 Clean all screws and threads with isopropyl alcohol (90% BB-1-8+BB-4 BB-1-8+BB-4 or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Battery Tray V2 ART. XL70V2B13 Flat screw M2.5*6 ART.XL70V2B13 Battery Tray Puller ART. XL70V2B14...
  • Page 48 Clean all screws and threads with isopropyl alcohol (90% Optional Optional or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight AS150 Big red housing Flat screw M2.5*6 AS150 Anti-spark bullet ART. XL70V2A04 ART.XL70V2B16 ART. XL70V2A06 Battery Quick Connect Mount ART.
  • Page 49 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight Flat screw M2.5*6 ART.XL70V2B16 Solder Battery wire AS150 Small red housing ART. XL70V2A08 AS150 Big black housing ART.
  • Page 50 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight S7 Big red housing ART. XL70V2A11 Flat screw M2.5*6 ART.XL70V2B16 SupraX S7 Male bullet Grub screw M4*6 ART.XL70A13 Battery Quick Connect Mount ART.
  • Page 51 Clean all screws and threads with isopropyl alcohol (90% or above) to ensure threadlocker bonds properly and prevent screws from loosening in flight S7 Small red housing Flat screw M2.5*6 ART. XL70V2A15 ART.XL70V2B16 Clamp Battery wire Rubber insulator cap 4mm*2mm (Cut by yourself) ART.
  • Page 52 WWW.XLPOWER-RC.COM XLPOWER CO,LTD xlpowerrc@163.com Facebook:xlpower instagram:xlpowerrc...