Secura MMF-003B Quick Start Manual

4-in-1 AUTOMATIC MILK FROTHER
1. The milk frother comes with two whisks. Use one whisk, and keep the other as a standby.
Attach the whisk on the axle inside the milk jug.
2. Add milk to the jug. Do not add more milk than the maximum line. The upper MAX
line is used for heating milk only. The lower MAX line is for frothing with or without
heating the milk. Adding more milk above the MAX line will cause overfl ow. Do not
operate the frother when liquid is below the MIN line.
3. Replace the lid on the jug and close tightly. Operate the frother for different uses,
as follows:
No. Function
(a). Frothing & Heating
1
for Dense Froth
(b). Frothing & Heating
2
for Airy Froth
(c). Frothing without
3
Heating
(d). Heating Only (with
4
a small amount of froth)
4. The frother will switch to standby mode automatically after the operation is complete. The
frothy milk is ready to serve. Unplug the frother from the electrical outlet.
WARNING: DO NOT operate without a minimum level of liquid in the container.
DO NOT operate when there is no whisk set in place.
Quick Start Guide
Model: MMF-003B
Fill Line Operation Max Cap.
Press the Upper
125ml
Button once
Press the Upper
125ml
Button twice
Press the Lower
125ml
Button once
Press the Lower
250ml
Button twice
Time
70-120s
70-120s
55-65s
130-180s