Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AMTAST AMT303
Summary of Contents for AMTAST AMT303
-
Page 2: Product Overview
PRODUCT OVERVIEW SET CLOCK Set Current Time Battery Indicator START TIME Set the time of start watering Watering HOW LONG Set watering duration (1minute to 23hour 59minutes） Rain Delay HOW OFTEN Set watering frequency (1minute to 7days） Child Lock Start automatic watering based on your programs AUTO Current Time Turn off all watering programs and shut off the valve... -
Page 3: Specification
SPECIFICATION Min/Max Operating Pressure 0.5Bar ~8bar( 7.25psi~116psi) Working Temperature 4.5℃~45℃(40.1℉~113℉) Power 2x AA alkaline batteries Waterproof IP55 Rain Delay Time 1day and up to 7days NOTE: 1. For outdoor use only 2. Clean the flter regularly and replace if it is wom in order to extend the working life of timer 3. -
Page 4: Product Installation
PRODUCT INSTALLATION 1. Installing the Batteries 1) Remove the battery cover on back of the timer 2) Install 2 new AA (1.5V) alkaline batteries (not included) 3) Firmly reinstall the cover back into the timer NOTE: · Firmly restore the battery to ensure water resistance. ·... - Page 5 NOTE: ·When programming the timer, please turn off the tap to avoid getting wet. ·Do not install the timer with tools. Hand tighten only. ·Keep away from freezing. Timer should be removed to avoid freezing damage. ·Filter can trap dirt particles, please clean filter regularly and replace if worn.
-
Page 6: Set Clock
Automatic Watering Program Setting 1. SET CLOCK 1. Turn dial to SET CLOCK 2. Press the " " to set the current hour and mintues. Press " " or turn dial to save changes. TIPS: · Hold the“ ”button can increase the time quickly. ·... - Page 7 2. SET START TIME 1. Turn dial to START TIME 2. Press the " " to set the current hour and mintues. Press " " or turn dial to save changes. 3. SET HOW LONG 1. Turn dial to HOW LONG 2.
- Page 8 4. SET HOW OFTEN 1. Turn dial to HOW OFTEN 2. Press the " " to select watering duration and press " " button or turn dial to save changes. 5. AUTO Turn dial to AUTO to allow your timer to water as you set the program before it will display the current day and time, and followed to the next watering plan.
-
Page 9: Off Mode
6. OFF MODE Turn dial to , the screen shows OFF and the battery level. All program are saved and the timer stop working. ADDITIONAL FEATURES MANUAL WATERING Please make sure the timer is in state. Auto Run 1. Press the " "... -
Page 10: Rain Delay
When you press the " " button again, the manual watering task ends even if it is watering and the timer will switch back to mode. Auto RAIN DELAY Please make sure the timer is in state. Auto Run 1. Hold and press " "... - Page 11 CHILDREN LOCK Please make sure the timer is in state. Auto Run Hold and press " " button 5s until the " " appears on the screen. If you want to cancel the " ", press " " button 5s again. Q1: The LCD screen does not display anything when the batteries are installed.
- Page 12 Q2: Water does not come on at preset time. Check if: Clock should be set to the correct time. Start time is set to desired the time. Rain Delay is on. OFF mode is on. The batteries are low. The faucet is turned off. Q3: The hose tap connection/outlet leaks.
- Page 13 Thank you for purchasing our products. If you have any questions, please contact us. Amtast USA Inc. 438 Skyline Dr E Lakeland FL.33809 E-mail: amtast1@gmail.com...