Grundig GBR-WA04 Owner's Manual

Owner's Manual
HD-SDI Cameras & Domes
GBR-WA04 Wall bracket for GCH-KxxxxV series
GBR-WA04.70.1.05.07.2012
© ASP AG
3.2. Mounting
Mark the screwing holes using the included Mounting Template and drill the holes.
Connect the Adapter Bracket as shown in the drawing to the wall. Connect the Main
Bracket as shown in the drawing to the Adapter Bracket. Connect the Wall Base Bracket
to the Main Bracket as shown in the drawing.
Make sure the cables are led freely through the Bracket as shown in the previous drawing
and that all screws are fixed tightly.
Connect the Dome Camera to the Wall Bracket as shown in the following drawing.
2 English
All manuals and user guides at all-guides.com
EN
Content:
1. Introduction
2. Package Contents & Needed Items
3. Installation
1. Installation Remarks
2. Mounting
1. Introduction
The GBR-WA04 can be used to mount the cameras GCH-K0323V & GCH-K0326V to a
wall. The items and tools needed for this mounting are listed as follows.
2. Package Contents & Needed Items
These parts are included:
- Wall Mount
- Adapter Bracket
- 4x Tapping Screw (Phillips Screw) 6x40
- 4x Plastic Dowel 8x40
- 2x Hexagon Screw 8x8
- 4x Hexagon Screw 5x30
- 4x Phillips Screw 4x8
- Allen Wrench (4mm)
- Installation Instructions
- Mounting Template
Tools needed:
- Tool for drilling
- Phillips Screw Driver
3. Installation
3.1. Installation Remarks
Install the mount onto a strong structure such as a concrete wall, steel beam, etc.
Avoid installing the mount onto an unstable structure such as a gypsum wall panel.
When installing the mount on to concrete only use specific concrete screws and plugs,
all the screw parts must be metallic.
When installing the mount onto wood avoid screwing too close to the edge of a piece of
wood.
English
Specifications GBR-WA04
Suitable for GCH-K0323V, GCH-K0326V*
Load max. 2 kg
Body material Aluminium
Colour White
Weight 0.715 kg
Dimensions (wxhxd) 144.6 x 110.5 x 268.8 mm
Dimensions
English
1
1
1
1
2
1
3