Connection preferences
The Connection Preferences screen enables you to define the settings
used to perform different types of HotSync operations. The screen
displays a list of available configurations that are ready to be further
defined; the list varies depending on the kind of software you've
added to your organizer.
For example, a Palm V Modem connection appears on the list. If you
have this modem, you only need to specify the phone setup (and
network connection — if required) to complete the configuration.
Note: You can purchase a Palm V Modem for use with your
organizer. See
You can also create custom configurations. There are four possible
kinds of connections.
Page 168
http://www.palm.com
A local HotSync connection: the direct
Serial to PC:
serial connection between your organizer and your
desktop computer. Your organizer is connected by
its serial port to the cradle, and the cradle is
attached by its cable to a serial (COM) port of your
desktop computer.
Serial to Modem:
attached to the serial port of your organizer and a
modem that is part of your computer or laptop.
A connection between the IR port of
IrCOMM to PC:
your organizer and the infrared device of your
computer or laptop.
IrCOMM to Modem:
of your organizer and a modem. The modem can be
attached to a computer or some other device
containing an IR port.
.
A connection between a modem
A connection between the IR port
Setting Preferences for Your Organizer