PRECAUTIONS • To avoid electrical shock, do not open the case of this product. • Operate this product using only the supplied AC Power supply. • Do not overload electrical outlets or extension cords; this can result in fire or electric shock.
Page 3
5. If necessary, change the settings to get the best images depending on your application by using the button on the bottom of the camera. - Get rid of the cap⑥ for the OSD button by turning counter-clockwise and then change the settings (refer to the included instruction manual for OSD Control).
Page 4
HOW TO ADJUST ANGLE OF VIEW 1. Vari-focal lens① Easily changeable angle of view: 2.8 to 12mm 2. Remove the sun-visor② and turn the locking screws on the knobs③ with the provided hex-head wrench counter-clockwise to make easier adjustment for angle of view.
Note: ▪ Apply the provided AC Power supply only. ▪ The total length of cable must not exceed 200’ including extension cable. TROUBLE SHOOTING If the camera does not function properly, check the following points before contacting the service center. Troubles Remedies No video...
AVAILABLE ACCESSORIES CDR0460 Stand-alone 4 CH Digital Video Recorder (DVR) CDR4450 Stand-alone 4 CH Digital Video Recorder (DVR) CDR0860 Stand-alone 8 CH Digital Video Recorder (DVR) CDR1660 Stand-alone 16 CH Digital Video Recorder (DVR) CDR0850 Stand-alone 8 CH Digital Video Recorder (DVR) CDR1650 Stand-alone 16 CH Digital Video Recorder (DVR) CA100BP...
Need help?
Do you have a question about the HDC150 and is the answer not in the manual?
Questions and answers