Download Print this page

PSB CustomSound CW262 Specifications

6.5” coaxial speaker system
Hide thumbs Also See for CustomSound CW262:

Advertisement

Be He ard, No t Se e n
P S B C u s t o m S o u n d I n - W a l l S p e a k e r S y s t e m
CW262 - 6.5" Coaxial Speaker System
The CW262 is a sophisticated 2-way in-wall system. A unique tweeter
waveguide swings 30 degrees left and right (60 degrees total) to
aim sonic energy toward the listening area. This SonicGuide™ is
designed for an optimum amount of directivity control and to give
consistent response whether aimed straight out or canted full left or
right. Secondly this tweeter in its SonicGuide is mounted on a 6.5"
rotating baffl e. This gives the ability to mount the system vertically
or horizontally at any height on a wall and by turning the baffl e and
angling the tweeter, aim sound precisely to the listener. This aiming
fl exibility assures fl at frequency response with none of the commonly
seen crossover hole issues. The 6.5-inch woofer with a fi berglass
textured polypropylene cone has high power handling and extended
bandwidth.
"Dog leg" style mounting clips ensure quick and easy mounting.
The CW262 has 2 toggle switches used to fi ne tune midrange and
treble level. Each has 2 positions with 2 dB separation.
In-wall loudspeakers must deal with limited space within the confi nes
behind the wall. Wall cavities are not built to any standard volume so
open back in-wall speakers must work within a wide range of wall
cavity volumes. PSB accomplishes this by giving the woofers higher
mass and stiffness than with conventional "in room" enclosures.
Extensive simulations and testing have shown that our designs deliver
high-performance sound quality with a broad range of wall cavity
volumes. The CW262 can be used with the CWS8 subwoofer/CWA-1
subamplifi er combination.
The CW262 was engineered to have a well balanced sonic signature
for maximum transparency and be a great match to any other PSB
product.

Advertisement

loading
Need help?

Need help?

Do you have a question about the CustomSound CW262 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PSB CustomSound CW262

  • Page 1 The CW262 can be used with the CWS8 subwoofer/CWA-1 subamplifi er combination. The CW262 was engineered to have a well balanced sonic signature for maximum transparency and be a great match to any other PSB product.
  • Page 2: Installation Notes

    PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 08/06. All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers 874 CW262 data.