Advertisement
Digital Waffle Maker
User Manual
Care & Cleaning
1.
Turn the thermostatic knob to '0' and unplug the power cable and ensure that the product is cooled
completely, then cleaning and collection.
2.
Cleaning the cooking surface with a soft cloth or sponge dampened in a mild detergent. Make sure to rinse
and wipe dry to ensure no detergent residue is left on the grids.
3.
Please don't use wire brush, stiff brush or other corrosive liquids to clean it, avoiding damage to the surface
coating.
4.
Never use an abrasive cleanser or harsh pad.
5.
Never clean the product with pressure washer or immersing in water.
6.
Never take your waffle maker apart for cleaning.
7.
Remove the drip tray (if applicable) and clean with a soft cloth or sponge and mild detergent. The drip tray is
dishwasher safe.
Tips & Maintenance
1.
Grids MUST be open when pre-heating (if closed the temperature inside is much higher than open, long
periods of high temperature is not good for non-stick coating), 356–400⁰F is optimal operational temperature.
2.
Please allow 30–45 minutes for pre-heating from a cold start.
3.
If maker is not being used for periods of 20–30 minutes between use, we recommend either turning OFF the
unit OR reducing the set temperature to 175⁰F.
4.
The unit is equipped with a temperature limiter, which will shut off the unit automatically if the temperature
reaches above 554⁰F.
5.
Use wooden or plastic utensils to take remove waffle, do not use any metal tool. If black flakes appear on
waffles or the surface, it's recommended to stop using the unit and not serve customers. This indicates the
non-stick coating is damaged. Please replace the grids before continuing use.
6.
With non-stick grids, it's not necessary to use oil or non-stick spray directly on the grid. You can add oil
inside your recipe or waffle mix. If you find that your batter is sticking, lightly coat the grid with some
non-stick safe oil.
Info@CarnivalKingSupplies.com
|
CarnivalKingSupplies.com
6
Advertisement
