Table of Contents
Advertisement
Quick Links
Table of Contents
1....What's in the Box
8....Warranty and Service Issues
8....Contact Information
What's in the Box
• One MultiWave II oscillator board
• One display microchip
• One chip puller
• One plastic dentist mirror
• One anti-static wrist strap
• One instruction booklet
• One MultiWave II silver sticker
IMPORTANT:
Be sure to save all packing materials
included with the MultiWave II upgrade kit if
you wish to ship the original oscillator card
back to PS Audio for recycling.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PS Audio MultiWave II
Summary of Contents for PS Audio MultiWave II
-
Page 1: Table Of Contents
• One instruction booklet • One MultiWave II silver sticker IMPORTANT: Be sure to save all packing materials included with the MultiWave II upgrade kit if you wish to ship the original oscillator card back to PS Audio for recycling. -
Page 2: Warning
Warning To prevent fire or shock hazard, do not expose the MultiWave II kit to rain or moisture. To avoid electrical shock, the Power Plant must be unplugged and fully discharged before opening. To prevent electric shock, use a 3 prong, grounded type power cable. -
Page 3: Installing The Upgrade
• A desk lamp, gooseneck lamp or other light placed next to the Power Plant so you can see what you are doing. • The MultiWave II Upgrade Kit. Before opening the Power Plant • Ensure it is fully unplugged •... - Page 4 This is the circuit board that is screwed to the Power Plant’s front panel. Locate chip puller enclosed with MultiWave II package. The chip puller will be used to care- fully remove the microchip. Notice the chip puller has two small prongs. Put the two prongs of the chip puller between the two prongs of the chip puller between the chip and the socket on the left and right side.
- Page 5 • If the Power Plant is powered on with the oscillator card inserted backwards, the Power Plant will require service from an authorized PS Audio dealer. Replace the bottom cover - P300 If your P300 has a fan, reattach the fan wire to the main board.
-
Page 6: Testing The Power Plant
Power Plant. This should help in lining up the Allen screw holes. Replace the Allen screws in the top cover. Place the MultiWave II sticker on the back of your Power Plant Testing the Power Plant To make sure everything is tip-top, perform the following tests: •... -
Page 7: Multiwave Ii Waveforms
Servo System The MultiWave II upgrade kit provides a virtual Servo System to continually correct for any DC offset. This will reduce hum from problematic or sensitive transformers as the Power Plant produces pure AC waveforms indefinitely without the need for calibration. -
Page 8: Service Issues
Warranty inside the U.S. and Canada PS Audio’s warranty is 3 years parts and labor, from the date of original purchase. This means that we warranty the product itself regardless of ownership, new or used. Warranty outside the U.S. and...
Need help?
Do you have a question about the MultiWave II and is the answer not in the manual?
Questions and answers