AudioSonic SK-1537, SK-1539 - LED Outdoor Speaker Manual

SAFETY

• By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord can not become entangled.

PARTS DESCRIPTION

1. Speaker
2. Remote control
3. Power adaptor

Remote control

BEFORE THE FIRST USE

• Connect the speaker to the mains, during charging the red indicator will be on. The red indicator will extinguish to indicate that the speaker is fully charged.

USE

• Turn on the light by pushing the [light on/off] button, the speaker will glow, choose the desired light setting with the remote control.

Pairing

• Press and hold the [Bluetooth] button for two seconds, the Bluetooth indicator will blink slowly this indicates that the Bluetooth is activated
• Turn on your Bluetooth device, search the speaker (SK-1537 or SK-1539) and choose to pair.
• The connection is made, you can start playback on your external device.
• Once paired successfully, both the speaker and your Bluetooth device will store the device.

CLEANING AND MAINTENANCE

• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
• Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.
• Basically the speaker will be splash proof but to increase the service lifetime we advise to take the speaker indoors during rain periods.