Subscribe to Our Youtube Channel
Related Manuals for PNY P-NSA2-EC-RF
Summary of Contents for PNY P-NSA2-EC-RF
-
Page 1: User Manual
II 2 Port ExpressCard User Manual Model P-NSA2-EC-RF Ver. 1.0 All brand names and trademarks are properties of their Respective owners. Aug/07 MN7036400002... -
Page 2: Features And Benefits
Features and Benefits Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module Serial ATA Generation 2 transfer rate of 300MBps Adds two external SATA ports Supports Native Command Queuing (NCQ), Non-zero offsets NCQ, and Out-of-order data delivery NCQ Supports Hot Plugging on external SATA port Package Contents 1 x eSATA II 2-Port ExpressCard 1 x Driver CD... -
Page 3: Hardware Description
Hardware Description Hardware Installation Insert the Card into the ExpressCard slot of your system. Make sure the card is securely inserted. Aug/07 MN7036400002... -
Page 4: Driver Installation
Driver Installation For Windows® XP/Server 2003 At the Found New Hardware Wizard: XP(w/SP1 or earlier)/Server 2003: continue to step #2 XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not this time, then click Next. Please insert the provided driver CD into your CD-ROM Drive, select Install the software automatically (Recommended), and click Next. - Page 5 For Windows® 2000 At the Found New Hardware Wizard, click Next. Select Search for a suitable driver for my device (recommended), then click Next. Please insert the provided driver CD into your CD-ROM Drive, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again.
- Page 6 displayed in the dialog box, the driver has been correctly installed. Hot-Plugging Hard Disk Drives To remove a drive from a powered up system, do the following: Right click My Computer and click Manage. Select Device Manager. Click Disk Drives, right click the target disk and select Disable/Enable.
Need help?
Do you have a question about the P-NSA2-EC-RF and is the answer not in the manual?
Questions and answers