Do you have a question about the ALS4A100 and is the answer not in the manual?
Questions and answers
Summary of Contents for BenchMark Wireline ALS4A100
Page 1
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com ALS4A100 SERIAL DATA RECORDER USER MANUAL ALS4A100 DATA RECORDER Rev A Aug-2007 Page 1 of 9...
Page 2
The device is certified for use in a zone 2 or Class 1 Div 2 area. It is certified to an ATEX standard (see certification document on last page). 2.0 DIMENSIONS ALS4A100 DATA RECORDER Rev A Aug-2007 Page 2 of 9...
Jumper J2 on the PCB board (see below) determines if the header block (refer to section 4) is written at the beginning of each date file. Jumper J1 is used for programming and must remain on for operation. ALS4A100 DATA RECORDER Rev A Aug-2007 Page 3 of 9...
Page 4
The maximum size allowed is 512MB. Smaller sizes can be used but not recommended. The recommended file system is FAT-16. FAT-32 can be used with some flash cards but will not work properly with others. ALS4A100 DATA RECORDER Rev A Aug-2007 Page 4 of 9...
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 4.0 SCHEMATIC AND PARTS LIST BLOCK DIAGRAM ALS4A100 DATA RECORDER Rev A Aug-2007 Page 7 of 9...
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 5.0 CERTIFICATION DOCUMENTS ALS4A100 DATA RECORDER Rev A Aug-2007 Page 9 of 9...
Need help?
Do you have a question about the ALS4A100 and is the answer not in the manual?
Questions and answers