Advertisement
Quick Links
USER MANUAL
EN
SKIMMERPLUS
FILTER PUMP
™
FOR ABOVE-GROUND SWIMMING POOLS
SFX600 / SFX1000 / SFX1500 models
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Should you encounter a problem with your Polygroup™ product, please DO NOT return the product to the place of
purchase. All warranty claims must be made directly to Polygroup™. For any setup and troubleshooting issues, visit
support.polygroupstore.com. You may be asked to return all or part of the product for inspection and/or repair. Do not
return any product to Polygroup™ without a Return Merchandise Authorization Number.
DISTRIBUTED BY: Polygroup Pacific Limited
Unit 606, 6th Floor, Fairmont House,
8 Cotton Tree Drive, Central, Hong Kong.
Advertisement
Related Manuals for SUMMER WAVES SKIMMERPLUS SFX600
Summary of Contents for SUMMER WAVES SKIMMERPLUS SFX600
- Page 1 USER MANUAL SKIMMERPLUS FILTER PUMP ™ FOR ABOVE-GROUND SWIMMING POOLS SFX600 / SFX1000 / SFX1500 models READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Should you encounter a problem with your Polygroup™ product, please DO NOT return the product to the place of purchase.
- Page 2 TABLE OF CONTENTS Warnings Preliminary Steps & Important Notes Filter Pump Power Information Parts List Setup Instructions & Filter Pump Operation Pump Motor Protection & Pump Maintenance Filter Cartridge Use & Care Pool Water Care Pump Disassembly & Storage Pump Servicing Instructions Pump Storage &...
- Page 3 IMPORTANT SAFETY INSTRUCTIONS When installing and using this product, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS Keep for future reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children. WARNING PREVENT NO DIVING!
- Page 4 Swimming Pool Barriers Important: Swimming pool barriers, which restrict access to the pool by small children, may be required by law. A barrier is necessary to provide protection against potential drowning. Barriers are not a substitute for constant supervision of children. Check state or local laws and codes before setting up pool.
- Page 5 Pump Operation Hours based on pool types and sizes. Clean and replace filter cartridge frequently. Replace only with genuine Polygroup™ / Summer Waves™ Brand filter cartridge. Refer to the Filter Pump manual for additional water care information.
- Page 6 Entrapment Risk Entrapment Avoidance: There shall be no protrusions or other obstruction in the swimming area, which may cause entrapment or entanglement of the user. If a suction outlet cover is missing or broken, do not use the pool. Suction can cause body part entrapment, hair and jewelry entanglement, evisceration, or drowning. Repair or replace the suction outlet cover before allowing the pool to be used.
- Page 7 Keep all breakable objects out of the pool area. Alcohol consumption and pool activities do not mix. Never allow anyone to swim, dive, or slide under the influence of alcohol or drugs. Severe electrical shock could result if you install your pump or filter on a deck. The pump or filter could fall into the water, causing severe shock or electrocution.
- Page 8 The UK plug and Australia plug cannot be used outdoors, and can only be plugged into an indoor socket outlet or a waterproof socket outlet. According to the International Standard, IEC 60364-7-702, on electrical installation of swimming pools and other basins equipment, the following installation distances must be respected: •...
- Page 9 PRELIMINARY STEPS READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your Filter Pump. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly. It is recommended that you have some petroleum jelly (not included) on hand for lubricating the gaskets and o-rings. IMPORTANT NOTES Installer shall follow written instructions provided for operation of the filter pump systems.
- Page 10 PARTS LIST Refer to "Parts & Setup Instructions" booklet for parts illustrations. Item Parts Name Qty. Item Parts Name Qty. Motor Seal Nut Return Fitting (RF), threaded Rubber Nozzle RF Diverter A: SFX600/1000 Pump Motor Assembly RF Locking Ring, threaded B: SFX1500 Pump Motor Assembly Return Fitting Service Plug Motor Seal / Canister Gasket...
- Page 11 SETUP INSTRUCTIONS Before assembly, take a few minutes to identify and become familiar with all the parts. WARNING: CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL. Suction & Return Fittings Installation Set up your pool following the pool Owner's Manual instructions.
- Page 12 Contact and consult your local pool supplies store for solutions/treatment, and maintain an adequate pH level of pool water (see POOL WATER CARE below). Dispose any used filter media in accordance with applicable regulations/legislation. Always use genuine Polygroup™ Summer Waves™ Filter Cartridges; they are available at where you purchased your pool or from polygroupstore.com. POOL WATER CARE The following items are required to get your pool ready for use.
- Page 13 f. Using a pool and/or solar cover will help maintain the pH and chlorine levels by reducing evaporation of pool water. g. CAUTION: High chlorine concentration and low pH level will damage the pool/pool liner. You must follow the instructions on quantity and safe usage of the pool chemicals you use. NEVER drop lumps or pellets of chemicals into the pool –...
- Page 14 Unscrew the Skimmer Seal Ring to remove the entire filtration system from the pool. Flip the Canister upside down. Unscrew the Motor Seal Nut and take out the Motor Assembly. IF YOU PREFER TO LEAVE THE SYSTEM ATTACHED TO THE POOL, please follow the process below instead.
- Page 15 PUMP STORAGE & WINTERISING After usage, you can easily empty and store away your pump in a safe place. Some pump owners, however, choose to leave their pump up all year round. In cold areas, where freezing temperatures occur, there can be a risk of ice damage to your pump.
- Page 16 TROUBLESHOOTING GUIDE Symptom Cause Solution A. Not plugged in A. Plug the Power Cord Set to a 3-wire grounded power outlet. Motor fails to start or kicks on and off B. Low Voltage B. Check the line voltage. It must be 215 to 245 V AC. A.