Advertisement
List of parts
1
2
3
4
5
6
7
1.
M4 screw 12x
2.
TX10 wrench 1x
3.
Shelf left sheet metal panel 1x
4.
Shelf right sheet metal panel 1x
5.
Shelf front wooden panel 1x
6.
Shelf rear wooden panel 1x
Shelf bottom sheet metal panel 1x
7.
Assembly instructions
Step 1. Connect bottom metal panel to the front and rear wooden panels.
Fasten panels with M4 screws (6x) and TX10 wrench.
7
1
2
5
6
Step 2. Connect left and right metal sheet panels to the shelf.
Fasten panels with M4 screws (6x) and TX10 wrench.
1
2
3
4
Step 3. Place the shelf on top of the Click and Grow 25 farm, make
sure the shelfs legs go into their corresponding sockets. Maximum load
the shelf can hold is 5 kg /11 lb.
Advertisement
Table of Contents
Related Manuals for Click & Grow 25
Summary of Contents for Click & Grow 25
- Page 1 Assembly instructions Step 1. Connect bottom metal panel to the front and rear wooden panels. Step 3. Place the shelf on top of the Click and Grow 25 farm, make Fasten panels with M4 screws (6x) and TX10 wrench. sure the shelfs legs go into their corresponding sockets. Maximum load the shelf can hold is 5 kg /11 lb.
- Page 2 Your shelf comes with a full warranty Click & Grow 25 In the rare case it has any defects, let us know! We’ll exchange it for a new one within the first 12 months from purchase. Top Shelf Manual Contact support@clickandgrow.com or visit our support page at support.clickandgrow.com...
Need help?
Do you have a question about the 25 and is the answer not in the manual?
Questions and answers