Advertisement
5) Carefully lift up on the release tab and remove the factory
ribbon cable.
7) Carefully lift up on the release tab and remove the factory
ribbon cable and replace with the Ribbon A cable with the
small connector closest to the navigation unit.
9) Route the Ribbon B cable over the large factory white rib-
bon cable to avoid the gears.
6) Remove the two screws from the center cover. Remove the
center cover.
8) Route the RIBBON B cable through the side of the
navigation unit with the contacts facing DOWN.
10) Connect the RIBBON B cable to the RIBBON A cable with
the contacts facing UP. A half twist on the Ribbon B will be
necessary for the next step.
Page 2
Advertisement
