Advertisement
Parts List
1 - Left End Member
1 - Right End Member
2 - Cross Braces
1 - Spacer Tube
4 - Core Tubes
8 - End Caps
6 - 1/4" X 3/4" Hex Bolts
1 - 1/4" X 2 1/2" Hex Bolts
7 1/7" Lock Nuts
2
Assemby Instructions:
Assemble End Members, Spacer Tube, and Cross Braces as shown above. Use 1/4"
x 2 1/2" Hex Bolt and Lock Nut to connect Cross Braces at their centers. Use 1/4" x
3/4" Hex Bolts and Lock Nuts to attach Cross Braces an Spacer Tube to End
Members. Fasten End Members to floor using fasteners suitable for your floor type
(Not Included).
Use a rubber mallot or other non-marring tool to insert an end cap into each end of
each core tube. Slide core tubes through centers of product rolls and place ends of
core tubes onto brackets on front of assembled display.
3
Advertisement
