Home2Link Shelly Plus Smoke General User And Safety Manual

Shelly Plus Smoke User and Safety Guide
Read before use
This document contains important technical and safety information about the device, its safety
use and installation.
⚠ ATTENTION! Before beginning the installation, please read carefully and entirely this
guide and any other documents accompanying the device. Failure to follow the installation
procedures could lead to malfunction, danger to your health and life, violation of the law or
refusal of legal and/or commercial guarantee (if any). Allterco Robotics EOOD is not
responsible for any loss or damage in case of incorrect installation or improper operation of
this device due to failure of following the user and safety instructions in this guide.
Shelly® devices are delivered with factory-installed firmware. If firmware updates are
necessary to keep the devices in conformity, including security updates, Allterco Robotics
EOOD will provide the updates free of charge through the device embedded Web Interface or
Shelly Mobile Application, where the information about the current firmware version is
available. The choice to install or not the Device firmware updates is the User's sole
responsibility. Allterco Robotics EOOD shall not be liable for any lack of conformity of the
Device caused by failure of the User to install the provided updates in a timely manner.
1
Pagina
Home2Link B.V.
Tingietersweg 107 2031 ER HAARLEM Tel: (085) 029 05 78
Postbus 2103 2002 CC HAARLEM www.home2link.nl info@home2link.nl
KvK Nr. 70620326 BTW Nr. NL NL858397262B01
NL14RABO0326619755