Safety Information; Symbols Used In The Instructions; Symbols On The Device; General Notes On Safety - Parkside PUV 2000 C2 Translation Of The Original Instructions

GB MT

Safety information

Caution! When using power tools,
observe the following basic safety
measures for the prevention of elec-
tric shocks and the risk of injury
and fire:
Symbols used in the
instructions
Hazard symbols with
information on preven-
tion of personal injury
and property damage.
Precaution symbol with in-
formation on prevention of
harm / damage.
Notice symbol with informa-
tion on how to handle the
device properly

Symbols on the device

Read carefully before use.
Wear safety gloves
Wear safety goggles
Do not expose to rain or
moisture.
Caution! Hot surface.
Risk of burns.
18
Pull out mains plug immedi-
ately, if the mains cable is
damaged or severed.
Alternating current
Safety class II
Electrical machines do not
belong with domestic waste.

General notes on safety

This device may cause seri-
ous injury if used improperly.
To avoid personal injury and
damage to property, read
and comply with the follow-
ing safety instructions and
familiarise yourself with all
control elements.
Caution: This is how to avoid
accidents and injuries:
Preparation
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given supervi-
sion or instruction concerning
use of the appliance in a safe
way and understand the haz-
ards involved. Children shall