Advertisement
Available languages
Available languages
Instructions for use:
Before the first use, charge the lamp for 3 hours to
100%.
To recharge, connect the USB Type-C cable to the
mains.
Green light indicates 100% battery charge. The red
light indicates that the battery is charging.
When the charging indicator is flashing, the lamp is
discharged.
Before charging the battery, turn off the lamp by the
switch on the base.
Dimming instructions:
To turn on the appliance, turn on the switch on the
base (ON). Move your hand 2 cm away from the in-
frared sensor to turn on and off.
To reduce or increase the brightness after switching
on, keep your hand at a distance of 2 cm over the
infrared sensor.
In this way, the brightness will dimmer.
Precautions:
• Do not use the charging cable if it is damaged.
• Make sure the lamp voltage matches your local voltage.
• Follow your community's guidelines for product dispo-
sal.
• Keep the product at temperatures between -10 ° C and
45 ° C.
• When the product is not used for long periods, rechar-
ge the battery every 3 months to avoid self-damaging
the battery.
• Use in the sun could interfere with the sensitivity of the
infrared sensor.
• Use a soft cotton cloth to clean the product.
• For cleaning, avoid the use of abrasive substances or
solvents to avoid damage to the surface.
• Do not disassemble the product as its components are
bonded together and will get damaged.
Advertisement
