DISASSEMBLING
1 Remove the Food
Container from the
Cover.
2 Open the Cover and
slide the Blade Lock
to the left to unlock
the Blade.
3 Carefully remove the
Blade by holding it by
the plastic frame and
lifting.
ATTENTION!
Blades are
EXTREMELY
SHARP handle
with caution!
4 Remove the Pusher
by placing your index
finger between the
nodes and pulling
toward yourself.
5 Close the Cover, flip
the attached Base
and Cover upside
down, then pull the
Cover Lock all the way
down to unlock it.
Cover and Base can
now be separated.
6 Wash all components
after each use. Allow
them to dry before
storing them.
CLEANING AND STORAGE
– For the easiest cleanup, we recommend you rinse/clean your
Vegetable Chopper Pro immediately after chopping. This will
help prevent fruit or vegetable fibers from hardening on the
parts, making it more difficult to clean.
– Remember to use the Cleaning Brush
instead of your fingers.
– Based on personal preference, you may
wish to lightly spray the Blade prior to
use with a cooking spray. This will assist
with the ease of removing ingredients
such as onions or garlic.
– To wash the parts, use warm, soapy water, and a kitchen brush
(or the provided Cleaning Brush) to remove any food residue.
You can also carefully use a toothpick to clean out the excess
food between the Pusher Teeth and the Blades.
– Parts are TOP-RACK dishwasher safe.
Keep the temperature below 150°F (65°C).
– Store the Cleaning Brush inside the Food Container.
– After drying, store out of reach of children.
If there is any problem with our Vegetable Chopper Pro,
please contact Customer Service.
vegetable chopper pro
d e ta c h a b l e b o x f o r e a s y c l e a n u p
SKU: MLR010024N
h a p p i n e s s i s h o m e m a d e
MUELLERDIRECT.COM
SUPPORT@MUELLERDIRECT.COM
888-632-9981
Cleaning
Brush
MADE IN CHINA
37 E 18TH STREET
NEW YORK, NY 10003
UNITED STATES
vegetable
chopper pro
d e ta c h a b l e b ox
f o r e a s y c l e a n u p
Need help?
Do you have a question about the VEGETABLE CHOPPER PRO and is the answer not in the manual?
Questions and answers
How do I assemble this chopper?
To assemble the Mueller Vegetable Chopper Pro:
1. Connect the hinge of the Wavy Cover onto the Base.
2. Flip the Cover upside down and push the Cover Lock all the way up until the Cover and Base latch securely.
3. Align the Blade node with the Blade node slot on the Cover Base, then insert the Blade.
4. Slide the Blade Lock to the right to lock the Blade in place.
Make sure the Blade is completely locked to prevent injury or damage. Hold the Blade by its plastic sides and try lifting it to check if it's secure.
This answer is automatically generated
Need instructions on how to disconnect pusher lid from nine blade, multi chopper slicer