Advertisement
Quick Links
Advertisement
Summary of Contents for ilco 009B
- Page 1 009B Tubular Key Duplicator OPERATION MANUAL...
- Page 2 009B Operation Manual The 009B Tubular Key Machine is a precision tool and should be operat- ed with care. Please read this instruction manual before duplicating any keys. This manual gives step by step instructions on how to duplicate tubular keys and includes a section on how to adjust the 009B.
- Page 3 Operation Manual 009B How to Duplicate a Key 1. Place original key (key being duplicated) on end of shaft to right of machine. (See Figure A) 2. Insert key blank (uncut key) into chuck end of main shaft making certain that the key blank indexing is in the same direction as the original key.
- Page 4 The cutter should be replaced when cuts begin to look rough or undue force is required for the cutter to cut the key blank. Do not attempt to cut keys when the cutter is dull. The proper cutter for use on the 009B is Ilco ®...
- Page 5 Operation Manual 009B How to Make Cutter Adjustments Cutter Height (Wall Thickness) Check cutter height by cutting sample key and measuring the distance across the cuts with dial calipers. If this dimension is not within the proper range, the cutter height must be adjusted. This dimension may range from .323 inch to .328 inch (A).
- Page 6 Kaba Ilco sells precision-made machines. The buyer assumes all risks and Kaba Ilco shall not be liable for any reason, if the machine has been subjected to improper installation, improper use, improper or inadequate maintenance, negligence, of any unauthorized modification or alteration is made to the machine not operated in accordance with Kaba Ilco’s...
- Page 7 Operation Manual 009B...
- Page 8 Kaba Ilco Corp. 400 Jeffreys Road • Rocky Mount, NC 27804 Phone 800.334.1381 • Fax 252.446.4702 www.kaba-ilco.com Code No. 125146...