Advertisement
●
Install the MC-R433U in the CD/DVD Library.
Before starting installation, be sure to turn both the
host computer and peripherals off.
For information related to the CD/DVD Library, refer
to the instruction manual for the CD/DVD Library.
Procedure for Opening the Door of the
* The illustration shows the CD/DVD Library with the drive storage
cover removed for ease of description.
1.
Select the [DOOR OPEN MODE] on the MENU screen of
the CD/DVD Library's LCD.
2.
Press and hold the "SELECT" switch for five seconds.
3.
Turn off the power of the CD/DVD Library when [THE DOOR
CAN BE OPENED] message is displayed on the LCD.
4.
Insert the key in the key cylinder located at the center of
the door to unlock and open the door.
Downloaded from:
https://www.usersmanualguide.com/
INSTALLATION
CD/DVD Library
Drive locking
screw mounting
hole
Drive storage
section
<With the MC-8100LU>
Drive storage
section
Drive locking
screw mounting
hole
<With the MC-8200LU>
Procedure for Opening the Drive Storage
Cover of the CD/DVD Library
Screw
Drive storage
cover
<With the MC-8100LU>
Drive storage
section
<With the MC-8200LU>
1.
Remove the screws from the drive storage cover of the
CD/DVD Library.
2.
Remove the drive storage cover.
Procedure for Determining the Setup
Position for MC-R434U
Drive No. 4
Drive No. 3
Drive No. 2
Drive No. 1
<MC-8100LU drive storage section> <MC-8200LU drive storage section>
1.
Install the drives to the drive slots No.1 through No.6 (No. 1
through No. 4 in the case of the MC-8100LU) sequentially.
It makes the work easy if the drives are installed from
the lowest number to the highest.
Drive storage
section
Screw
Drive storage cover
Screw
Drive No. 6
Drive No. 5
Drive No. 4
Drive No. 3
Drive No. 2
Drive No. 1
E
Advertisement
