Download Print this page

FARMSTREAM 4G Static Setup Instructions

Download this manual

4G Static

5MP Camera

Setup Instructions

Page 2 Farmstream 4G Static 5MP Camera Setup STEP 1 Check your box for: 1 x 4G Static Camera 2 x Antennas 1 x 3-pin plug adapter 1 x Screw pack (not pictured) 1 x Giffgaff SIM (not pictured) ©Farmstream LTD 2023...
Page 3 Use the Allen key provided to carefully remove the back access panel. Insert the SIM card and SD card (if using) as shown below. When inserted correctly, each of these will gently click into place. Replace the back access panel. SD Card 4G SIM ©Farmstream LTD 2023...
Page 4 This will be the 3-pin plug adapter if powering the camera via mains or this will be a 12V battery connection cable if powering the camera via a 12V battery. Reset Audio button Power ©Farmstream LTD 2023...
Page 5 Use your mobile phone to access the App / Google Play store and download a free app called ‘CamHiPro’. Once downloaded, open CamHipro and give it full permissions. The following steps can be used to connect your 4G Static to the CamHiPro app: Select ‘Scan QR code’...
Page 6 Your 4G Static Camera is now setup, and you’ll be able to view footage wherever you are using your mobile phone. Feel free to unplug your camera and mount it where you want to use it before reconnecting to power.