Do you have a question about the AQUAJETPLUS TSC10 and is the answer not in the manual?
Questions and answers
Corinne Churchill
April 12, 2025
Is it possible to buy a replacement cap for the clean water container as mine is missing
Ian Holmes
February 26, 2025
The hose is leaking at the point where it attaches to the machine. How do I fix this, and if necessary how do i replace the hose? Do you have a video?
2 comments:
Ian Holmes
February 26, 2025
Ian Holmes
Mr. Anderson
February 26, 2025
To fix a leaking hose at the attachment point on the Tower Hobbies AQUAJETPLUS TSC10:
1. Ensure the hose is securely connected to the unit and attachment. 2. Check for any visible cracks or damage on the hose or connector. 3. If loose, reseat the hose and tighten any connections. 4. Inspect the sealing rings for wear or misalignment and reposition or replace if necessary.
To replace the hose if needed:
1. Purchase a compatible replacement hose from the official supplier. 2. Detach the old hose by carefully removing it from the connection points. 3. Attach the new hose, ensuring all fittings are secure. 4. Test for leaks before use.
If problems persist, contact customer support for further assistance.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Tower Hobbies AQUAJETPLUS TSC10
Summary of Contents for Tower Hobbies AQUAJETPLUS TSC10
Page 1
T548005 TSC10 AQUAJETPLUS SPOT PRO CLEANER SAFETY AND INSTRUCTION MANUAL PLEASE READ CAREFULLY *Subject to registering your Extended Guarantee online at www.towerhousewares.co.uk.
Page 2
Specifications: This box contains: Instruction Manual Hose Hose Hook Accessory Attachments: • Suction Nozzle • Brush with water suction cover Handle ON/OFF button Clean Water Bucket Hose Hose Hook Watering Button Hose Handle Water Level Indicator Sewage Bucket Power Cord Hook Air Outlet Air Outlet Brush With Water Suction Cover...
Page 3
Wiring Safety for UK Use Only Earth Fuse (Green/Yellow) Neutral Live (Blue) (Brown) IMPORTANT As the colours in the mains lead of this rating already fitted and conforming to BS 1362 appliance may not correspond with the and be ASTA approved. coloured markings identifying the terminals in If in doubt consult a qualified electrician who your plug, please proceed as follows:...
Important Safety Information: Please read these notes carefully BEFORE using your Tower appliance Check that the voltage Switch off at the wall • • of the main circuit socket then remove corresponds with the the plug from the rating of the appliance socket before fitting before operating.
Page 5
• This appliance can • This appliance is for be used by children household use only and aged from 8 years and NOT for commercial or above and persons industrial use. with reduced physical, sensory or mental DO NOT use the •...
Page 6
• DO NOT use the • Keep the appliance appliance without the away from heat sources. solution tank and dirty water tank in place. • In the unlikely event the appliance develops DO NOT sit on the a fault, stop using •...
Page 7
Before First Use: Read all instructions and safety information carefully before first use. Please retain this information for future reference. Remove any packaging from the product and retain until you have checked all the parts are present and checked for any visible damage to the appliance or cord. Prepare the appliance, as instructed below.
Page 8
Re-install the clean water tank onto the appliance, sliding the tank into the unit until there is an audible click and the lock catch reengages. Insert the handle into the chosen accessory attachment, ensuring that the water outlet hole is aligned.
Page 9
Accessories: Brush - To agitate stubborn stains and suck up spills on e.g. carpets Suction Nozzle - For difficult to reach places such as the back of a chair Using your Appliance: • This portable carpet cleaner uses powerful suction to remove stains, spots and stubborn dirt in tricky spots around your home and car and is suitable for carpets, hard floors, stairs, upholstery and car interiors.
Page 10
Stubborn Dirt: Clean the area with cleaning solvent first, prior to scrubbing. CAUTION! DO NOT put cleaning solvent in to the clean water tank. CAUTION! Ensure that the solvent is not harmful to the carpet before use. For the amount and usage of the cleaning solvent, please read and follow the manufacturer’s instructions carefully.
Troubleshooting Problem Possible Solution The appliance does Ensure that the plug is properly connected. not work after the switch is turned on Check that the power cord is not damaged. The overheat protection has activated. Refer to the Safety Cut-off section. When the water spray Ensure that the nozzle is not blocked.
Page 12
Clean the tank, upper cover and sealing strip. Re- install the sealing ring and upper cover, ensuring the tabs at the rear of the cover fit into the slots of the tank. Press down until the locking tab reengages and there is an audible click. Slide the dirty water tank into the unit until the locking tab engages and there is an audible click.
Page 13
Remove the clean water tank once more , tilt the appliance and pour away any remaining water in the base of the unit. Cleaning the Housing: Wipe the housing with a soft, damp cloth. Add a little detergent to remove any stubborn dirt. Cleaning the Accessories: Remove the used accessories from the appliance and rinse thoroughly with clean water.
Page 16
thank you! We hope you enjoy your appliance for many years This product is guaranteed for 12 months from the date of original purchase. If any defect arises due to faulty materials of workmanship, the faulty products must be returned to the place of purchase.
Need help?
Do you have a question about the AQUAJETPLUS TSC10 and is the answer not in the manual?
Questions and answers
Is it possible to buy a replacement cap for the clean water container as mine is missing
The hose is leaking at the point where it attaches to the machine. How do I fix this, and if necessary how do i replace the hose? Do you have a video?
Ian Holmes
To fix a leaking hose at the attachment point on the Tower Hobbies AQUAJETPLUS TSC10:
1. Ensure the hose is securely connected to the unit and attachment.
2. Check for any visible cracks or damage on the hose or connector.
3. If loose, reseat the hose and tighten any connections.
4. Inspect the sealing rings for wear or misalignment and reposition or replace if necessary.
To replace the hose if needed:
1. Purchase a compatible replacement hose from the official supplier.
2. Detach the old hose by carefully removing it from the connection points.
3. Attach the new hose, ensuring all fittings are secure.
4. Test for leaks before use.
If problems persist, contact customer support for further assistance.
This answer is automatically generated