Spraying Systems Co TeeJet TECHNOLOGIES AEROS 9040 User Manual
  1. Manuals
  2. Brands
  3. Spraying Systems Co Manuals
  4. Control Unit
  5. TeeJet Technologies AEROS 9040
  6. User manual

Spraying Systems Co TeeJet TECHNOLOGIES AEROS 9040 User Manual

Hide thumbs Also See for TeeJet TECHNOLOGIES AEROS 9040:
Table of Contents

Advertisement

Quick Links

Download this manual
AEROS 9040
U S E R
G U I D E
Software version 4.21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TeeJet TECHNOLOGIES AEROS 9040 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Spraying Systems Co TeeJet TECHNOLOGIES AEROS 9040

Summary of Contents for Spraying Systems Co TeeJet TECHNOLOGIES AEROS 9040

  • Page 1 AEROS 9040 U S E R G U I D E Software version 4.21...

  • Page 2: Table Of Contents

    Table of Contents START SIMPLE GUIDANCE #1 POWER ON #2 HOME SCREEN System Setup .................................1 Simple or Advanced Mode ............................1 #3 GO TO CONFIGURATION 1) Set Up the Local Cultural Settings ...............................2 2) Set Up the GNSS ......................................2 3) Set Up the Implement ....................................3 Implement Settings per Equipment Present .......................3 Single Section Setup ..............................3 Section(s) with ISOBUS Sprayer/Spreader Setup ......................4...
  • Page 3 Aeros 9040 Field Computer Configure Control Channels ..................................17 Device Setup ................................17 Product Control Channels ............................18 TankMatic ................................18 Configure Product ....................................... 19 APPLICATION MAPPING Duplicating and Transferring Maps ..........................20 Coverage Map ....................................... 20 Prescription Map ......................................20 Application Map ......................................21 Target Rate Map ......................................
  • Page 4 Aeros 9040 Field Computer ADDITIONAL IMPLEMENT OPTIONS TIP SELECTION Preset ..................................36 Current Tip ................................37 DROPLET SIZE MONITOR Setup ..........................................37 Enable/Disable DSM ...............................37 Tip Selection / Current Tip ............................37 Input/Output Module Pressure Sensor ........................37 Operation ........................................38 Status Bar ................................38 Droplet Size Chart................................38 Guidance Bar ................................38 REVERSE SENSE MODULE...

  • Page 5: Start Simple Guidance

    Aeros 9040 Field Computer START SIMPLE GUIDANCE #1 POWER ON #2 HOME SCREEN Once the power up sequence has completed, the Home screen will Bright Touch Screen appear with the options to start a new job or continue an existing job. Home Button Favorites Button Power Button...

  • Page 6: Go To Configuration

    Aeros 9040 Field Computer #3 GO TO CONFIGURATION From the Home screen, select the System Setup bottom button to configure the console, the machine and its implements. Four side tabs access options for Machine/Implement Configuration, Data Management, Console Settings, and Tools. Side Tabs Configuration side tab Data Management side tab...

  • Page 7: Set Up The Implement

    Aeros 9040 Field Computer 7. Exit this screen to begin initializing the GNSS receiver. This takes 3) Set Up the Implement about a minute, and the console will not respond until complete. Implement Setup is used to establish the various settings associated with straight mode, spreader mode, or staggered mode.

  • Page 8: Section(S) With Isobus Sprayer/Spreader Setup

    Aeros 9040 Field Computer ►Applied Alert – used to establish an alert to signal when exiting ►Working Width [Spreader Implement Type completed on the ISOBUS ECU] – used to enter the total width of the implement or entering an applied area ►BoomPilot Start Mode –...

  • Page 9: Multiple Sections With Sdm/Sfm And Dcm With Ism/Asb Setup

    Aeros 9040 Field Computer Multiple Sections with SDM/SFM and DCM with ISM/ASB Setup Multiple Sections with SDM/SFM and DCM with ISM/ASB Setup is used when a Section Driver Module (SDM) or Switch Function Module (SFM) is on the system along with a Dual Control Module (DCM) with either a Input Status Module (ISM) or Automatic Switch Box (ASB).

  • Page 10: Section Numbers

    Aeros 9040 Field Computer ►Lateral Implement Offset Distance  – used to define the Figure 1: Implement Type – Straight lateral distance from the center line of the machine to the center of the implement ►Overlap* – used to define the amount of overlap allowed when using automatic boom section control ►Delay On Time* –...

  • Page 11: Spreader - Teejet

    Aeros 9040 Field Computer Spreader – TeeJet A virtual line is created in line with the delivery disks from which the application section or sections can vary in length and can be at different distances from the line (availability depends on the specific equipment in the system).

  • Page 12: Lateral Implement Offset Distance Adjustment

    Aeros 9040 Field Computer Lateral Implement Offset Distance Adjustment Lateral implement offset distance is used to enter the distance from the center line of the machine to the center of the implement. When on-screen mapping shows no overlap or gap, yet field application produces an overlap or gap consistently to only one side in the direction of travel, an adjustment to the lateral implement offset distance should be calculated and made to the implement offset distance value.

  • Page 13: Lateral Implement Offset Adjustment

    Aeros 9040 Field Computer Lateral Implement Offset Adjustment To calculate an implement offset adjustment using adjacent guidelines: 1. Create a straight AB line.  as if you were operating the implement, and place flags at the outside edges of the 2.

  • Page 14: Start New Job Or Continue Job

    Aeros 9040 Field Computer #4 START NEW JOB OR CONTINUE JOB Once the power up sequence has completed, the Home screen will appear with the option to start a new job or continue an existing job. The Setup for the specific machine and its components must be console must have GNSS before starting or continuing a job.

  • Page 15: Set Up Guidance

    Aeros 9040 Field Computer #5 SET UP GUIDANCE 1) Choose a Guidance Mode To choose a Guidance Mode: Three guidance screens assist in keeping you informed. 1. Press NAVIGATION AND GUIDANCE OPTIONS tab to display navigation options. Vehicle View Guidance creates a computer-generated image of the 2.

  • Page 16: Establish An Ab Guideline

    Aeros 9040 Field Computer 2) Establish an AB guideline 3) Create an Application Boundary 1. Drive to the desired location of Point A Application boundaries establish areas where product is and is not applied while using ABSC or BoomPilot. Boundaries can be established 2.
  • Page 17 Aeros 9040 Field Computer Figure 11: Boundary in Progress Figure 14: Add Interior Boundary 0.00 5.48 Mark A 2.32 Mark A While creating an external or initial boundary, the boundary line will be to the exterior of the outermost active section. While creating an interior or additional boundary, the boundary line will be to the interior of the innermost active section.

  • Page 18: Add Rate Control

    Aeros 9040 Field Computer ADD RATE CONTROL The Aeros 9040 provides two options for rate control. ►ISOBUS Universal Terminal (UT) – gives access to an ISOBUS Electronic Control Unit (ECU) options and operation. This provides crop sprayer or spreader control when integrated into the implement of either capability. ►TeeJet Dual Control Module –...

  • Page 19: Configure Product

    Aeros 9040 Field Computer Mapping Configure Product GNSS-based product application mapping is available in Vehicle When a rate control system is present, Product options are available for configuring product control channel names, product volumes, View or Field View. Mapping can record areas covered by the implement (Coverage) or how much product has been applied and application rates, increment for adjusting rates, and maximum/minimum where (Application), and can direct single- and variable-rate product...

  • Page 20: Teejet Dual Control Module

    Aeros 9040 Field Computer TEEJET DUAL CONTROL MODULE Rate Control Screen Overview When a Dual Control Module (DCM) is integrated into the system, rate control options are easily accessible from the Rate Control screen and mapping options are available on the Vehicle View and Field View guidance screens. NOTE: For detailed setup instructions, refer to the supplemental TeeJet Dual Control Module Rate Control guide.

  • Page 21: Configure Control Channels

    Aeros 9040 Field Computer Device Setup Configure Control Channels When a Dual Control Module (DCM) is present, Device Setup options When a Dual Control Module (DCM) is present, Control Channels options are available for configuring the DCM, associated Control are available for associating a device serial number to a DCM, and a DCM and identification to a Product Control Channel or TankMatic.

  • Page 22: Product Control Channels

    Aeros 9040 Field Computer Product Control Channels TankMatic When a Dual Control Module (DCM) is present, Product Control When a TankMatic is present, TankMatic options are available to Channels are used to configure product-control communication establish the empty, minimum, and maximum levels for the tank, and to channels for the DCM.

  • Page 23: Configure Product

    Aeros 9040 Field Computer Configure Product When a rate control system is present, Product options are available for configuring product control channel names, product volumes, application rates, increment for adjusting rates, and maximum/minimum rate limits and corresponding display colors for mapping. 1.

  • Page 24: Application Mapping

    Aeros 9040 Field Computer APPLICATION MAPPING Duplicating and Transferring Maps GNSS-based product application mapping is available in Vehicle Maps are stored in the job data. Using Data - > Job Data - > Manage, View or Field View, in any guidance mode when a rate controller is on the system.

  • Page 25: Application Map

    Aeros 9040 Field Computer With Fieldware Link (v5.01 or later), users can import VRA jobs created Target Rate Map in Fieldware Link, as well as export job data from the console, edit the Target Rate Map shows the target application rate that the rate included maps to create Target Rate or Prescription Maps, and transfer controller attempted to achieve at each location.

  • Page 26: Information On Guidance Modes

    Aeros 9040 Field Computer INFORMATION ON GUIDANCE MODES Vehicle View Vehicle View creates a computer-generated image of the vehicle position displayed in the application area. From this screen all setup, mapping, and navigation options can be accessed via the Options tabs on the right side of the screen. To access the Vehicle View screen: 1.

  • Page 27: Field View

    Aeros 9040 Field Computer Field View Field View creates a computer-generated image of the vehicle position and application area from an aerial perspective. From this screen, all setup and navigation options, as well as Pan Mode and mapping options, can be accessed via the Option tabs on the right side of the screen. To access the Field View screen: 1.

  • Page 28: Realview Guidance

    Aeros 9040 Field Computer RealView Guidance RealView Guidance allows live video input to be displayed instead of a computer-generated image. From this screen all setup and navigation options can be accessed via the tabs on the right side of the screen. To adjust the camera view [reverse, upside down], go to Setup->...

  • Page 29: Guidance Modes

    Aeros 9040 Field Computer GUIDANCE MODES Straight AB Guidance Straight AB Guidance provides straight-line guidance based on A and B reference points. The original A and B points are used to calculate all other parallel guidelines. NOTE: Offset to adjacent guidelines will be calculated using the guidance width: see “Configuration”...

  • Page 30: Guidance Screen Icons

    Aeros 9040 Field Computer GUIDANCE SCREEN ICONS Navigation and Guidance Options Guidance Mode Tip Flow Monitor Guidance Mode – access to guidance mode Tip Fault Reset – clears any tip fault options indications. Straight AB Guidance – provides straight- Return to Point line guidance based on A and B reference Mark Point –...
  • Page 31 Aeros 9040 Field Computer Screen Options RealView Guidance Options Zoom In/Out Vehicle View – icons adjust the vehicle’s Video Camera Select – selects one of up to view or perspective to the horizon from eight camera views if a Video Selection Module vehicle view to bird’s-eye view.

  • Page 32: Guidance Bar

    Aeros 9040 Field Computer GUIDANCE BAR The Guidance bar keeps you informed of your choice of selectable information, navigation activity, and section status. Navigation Activity & Boom Status Selectable Information GNSS Status – displays “No GNSS” when GNSS is unavailable, or Speed –...

  • Page 33: Status Bar

    Aeros 9040 Field Computer STATUS BAR The Status Bar provides information on GNSS status, guidance mode, Assisted/Auto Steering Status boundary area, assisted/auto steering engagement, tilt correction, Green = engaged, actively steering implement control status, droplet/pressure status, tip flow status, and Yellow = enabled, all conditions have been met to allow for rate control status.

  • Page 34: Guidance Features Details

    Aeros 9040 Field Computer GUIDANCE FEATURES DETAILS A+ Nudge Feature Azimuth Degree An azimuth is defined as a horizontal angle measured clockwise The A+ Nudge feature allows the current guideline to be shifted to from a north baseline. When using an azimuth, the point from the vehicle’s current location.

  • Page 35: Return To Point

    Aeros 9040 Field Computer Return to Point 9:03 AM Return to Point provides guidance back to an established point in Vehicle View and Field View. In Vehicle View an arrow directs the vehicle back to the established point. In Field View only the point is displayed.

  • Page 36: Next Guideline Feature

    Aeros 9040 Field Computer Next Guideline Feature BOOMPILOT If more than one guideline is saved, the Next Depending on if there is a section control system present and when Guideline feature will become available. By pressing present what kind of section control is being used as well as what the Next Guideline option, the vehicle will be directed to the next options are enabled, there are multiple options for BoomPilot section guideline saved in the console.

  • Page 37: No Section Control Module

    Aeros 9040 Field Computer No Section Control Module ISOBUS Sprayer If a section control system is not present, the BoomPilot Icon or an If an ISOBUS Electronic Control Unit (ECU) is present, the BoomPilot optional work on/off switch is used to turn the single section on or off. Icon or an optional switchbox can be used to turn the boom on or Only one section width will be illustrated and the status bar will have no off.

  • Page 38: With Switchbox

    Aeros 9040 Field Computer With Switchbox With an ISOBUS Implement Status Module (ISO ISM) All ISOBUS rate control configurations should be setup before starting All ISOBUS rate control configurations should be setup before starting BoomPilot. Automatic or Manual Regulation Mode should not affect the BoomPilot.

  • Page 39: With Optional Spreader On/Off Switch

    Aeros 9040 Field Computer To switch application off or on automatically: With TeeJet Section Control Module and 1. Press NAVIGATION AND GUIDANCE OPTIONS tab to display Switchbox or ISM navigation options. SmartCable, Section Driver Module (SDM) or Switch Function Module 2.

  • Page 40: Additional Implement Options

    Aeros 9040 Field Computer ADDITIONAL IMPLEMENT OPTIONS TIP SELECTION Preset When the system includes a Pressure Sensor Interface Kit (PSIK), Tip presets allow saving of up to five tips for quick recall. or a Dual Control Module with Product Control Application Type set to “Liquid”...

  • Page 41: Current Tip

    Aeros 9040 Field Computer Current Tip DROPLET SIZE MONITOR Current Tip shows the active tip for determining current droplet size When the system includes a Pressure Sensor Interface Kit (PSIK), information. Tips must be preset to be available for current tip selection. or a Dual Control Module with Product Control Application Type set 1.

  • Page 42: Operation

    Aeros 9040 Field Computer Guidance Bar Operation The Guidance bar keeps you informed of your choice of selectable Status Bar information including Current System Pressure and Current Droplet Size. Droplet/Pressure Status displays information regarding the current status of the droplet size and system pressure. 1.

  • Page 43: Reverse On Guidance Screens

    Aeros 9040 Field Computer GROUND SPEED OVERRIDE Available with a Dual Control Module (DCM) when using a Automatic Switchbox (ASB) or Input Status Module (ISM), Ground Speed Override (GSO) is the minimum speed used for automatic application rate control. When the vehicle speed falls below this setting, the Ground Speed Override speed is used to control the application rate, rather than the actual ground speed.

  • Page 44: Boompilot

    Aeros 9040 Field Computer BOOMPILOT BoomPilot Start Mode Depending on if there is a section control system present and when BoomPilot Start Mode is used to set if the BoomPilot control is started present what kind of section control is being used as well as what options are enabled, there are multiple options for BoomPilot section automatically by speed, or manually by the BoomPilot icon.

  • Page 45: Tip Flow Monitor

    Aeros 9040 Field Computer DATA MANAGEMENT TIP FLOW MONITOR When a Tip Flow Monitor Kit is present, Tip Flow Monitor options are used to configure flow limits and alarm behavior, and to run the tip flow balance process. Data Management allows for transfer and management of job data, reporting of job data, changing of job mode, and transfer and NOTE: For detailed setup instructions, refer to the supplemental Tip management of machine settings.

  • Page 46: Job Data

    Aeros 9040 Field Computer Job Data Machine Settings Machine Settings is used to transfer profiles for machine settings When in advanced job mode, job data options are used to transfer job (delete, import, export) and manage profiles for machine settings information (delete, import, export) and manage job information (create (create a new profile, copy or delete a profile, save the current a new job, delete a job, or copy a job’s Guidelines, Boundaries, Applied...

  • Page 47: System Configurations

    Aeros 9040 Field Computer SYSTEM CONFIGURATIONS The following diagrams are reflective of typical Aeros configurations. Due to the variety of possible configurations, this should be used for reference purposes only. Figure 26: Aeros IC18 Spreader TeeJet CAN Options RealView Camera Aeros Console 9040 Video Selector Module RXA-30 GPS Antenna...
  • Page 48 Aeros 9040 Field Computer Figure 27: Aeros IC18 Sprayer TeeJet CAN Options RealView Camera Aeros Console 9040 Video Selector Module RXA-30 GPS Antenna Terminator GPS GLONASS Antenna RX510 GPS Receiver / RX610 GPS Receiver to Aeros Console 45-05953 - Areos ISOBUS-CAN Harness 45-05968 - Harness, Aeros UT, Reverse Sense Module TJT Junction Box Only...
  • Page 49 Aeros 9040 Field Computer Figure 28: Aeros DCM TeeJet CAN Options RXA-30 GPS Antenna GPS GLONASS Antenna RealView Camera RX510 GPS Receiver / RX610 GPS Receiver Video Selector Module Terminator Aeros Console 9040 to Aeros Console 45-05884 - Areos Basic CAN Harness FieldPilot AutoSteer System to RS-232 Reverse Sense Module...
  • Page 50 AEROS 9040 U S E R G U I D E START SIMPLE GUIDANCE #1 POWER ON #2 HOME SCREEN #3 GO TO CONFIGURATION 1) Set Up the Local Cultural Settings 2) Set Up the GNSS 3) Set Up the Implement #4 START NEW JOB OR CONTINUE JOB #5 SET UP GUIDANCE 1) Choose a Guidance Mode...

Table of Contents