Power Supply - BRAUN Photo Technik ScoutingCam BLACK200A Mini Manual

Power supply

Before using the device, users can choose using battery or DC
power supply according to their needs. If you choose battery
power, please insert the batteries first. This device supports 1.5
V AA batteries and 3.7V 18650 lithium batteries.
♦ If you choose to use 1.5 V AA batteries, please open the
device and find the battery compartment, insert 4*1.5 V AA
batteries. When inserting the battery, make sure that the
battery polarity is correct.
♦ If you choose to use 3.7V 18650 lithium battery, please open
the device and find the corresponding battery compartment,
which can be loaded with 1 or 2 3.7V 18650 lithium battery.
When installing the battery, ensure that the battery polarity is
correct. The 3.7V 18650 lithium battery can be charged in the
camera with a USB charger DC 5V 1.5A (not provided), the
indicator light of the case will turn on red when charging and
the red light will turn off when fully charged.
♦ When using the power adapter DC 6V 1.5A (not provided) to
charge, please find the DC adapter port on the bottom of the
device and open the rubber, connect one end of the power
adapter to the device and the other end to the power supply for
power supply.
3