Schlage FHS FES112 Installation Manual

FSH FES112 Installation Manual
1.
INTRODUCTION
The FES112 High Security Electric Custodial Strike was purposely designed for heavy duty high security
applications where superior holding strength is required, such as detention centers, correctional facilities and the
like. The strike works in conjunction with a heavy duty double throw deadlock or any other mechanical lock with a
deadbolt dimension of 33-36mm fully extended throw, 10-17mm width and 57-59mm height. With a holding
force in excess of 1000kg, multiple monitoring functions and 12-30VDC multi-voltage operation, the FES112 is a
viable solution for either new or retrofit high security projects. The device is manufactured in FSH's Sydney
operation and received a recent face-lift with additional door monitoring functions as well as dip-switch selection for
Revision (REV) 2 and Revision (REV) 3 field-select ability.
2. FEATURES
Installed into the door frame, the FES112 operates in conjunction with a mechanical high security heavy duty
Custodial type (or similar) deadlock. The extended dead bolt of the door lock is captured by the twin locking jaws of
the FES112 Strike and is held securely until the strike receives an access or release signal from the access control
system.
Monitoring functions include Door Position Reed Switch, Strike-Jaw/Lock Status monitoring and Strike Cover Plate
Removed monitoring (Anti Tamper).
On operation of the FES112, the strike jaws are released through an Access Control signal and the door is ready to
be pushed or pulled open with the mechanical door lock bolt still fully extended.
The redesigned FES112 can be wired in a way that the jaws remain in the open position until the door lock re-
turns into the FES112 Strike, closing the jaws to re-lock the door.
The Strike-Jaws cannot be manually pushed back into locked position as long as the door remains open
(this feature relies on either the Bolt Sensor Microswitch or Door Position Reed Switch or both).
FES112 HIGH SECURITY
ELECTRIC CUSTODIAL STRIKE
INSTALLATION MANUAL
Page 1 V3.1 Jan 2017