ON Technology Partners SmartVPN Quick Start Manual

SmartVPN
Quick Start Guide
PAGE 1
03.27.20.02

HARDWARE SETUP

A
Plug-in power cord
(
Make sure the power light is off
B
Connect Patch Cable to Router
A
You will plug the power cable in before you plug into the device to verify that the switch is not powered on.
B
You will plug in the SmartVPN into the Router or Switch on the network that you want remote access to.
This could be at your home or office depending on the situation.
C
Once you know that power is not on to the switch, you will plug the USB-C power cable into the device.
D
Last step is to simply turn on the switch to the device
Move on to the Router/Firewall Setup on Page 2
O
n Technology Partners, 7100 Euclid Ave, Suite 120, Cleveland, OH 44103 ontechnologypartners.com 216.920.3100
C
Connect Power to the Device
)
D
Power the SmartVPN device
B

USER SETUP

Users are maintained by
On Technology Partners
User Accounts should be set up
prior to you receiving the
SmartVPN unit as part of the
ordering process. If you have
not received your account info,
C
please follow instructions below.
Send an email to:
SmartVPN@ontechpartners.com
to request usernames &
passwords. Email should
contain First & Last names of
requested users. User Passwords
will be distributed via LastPass.
If you don't have an account,
you can sign up for a free
account at LastPass.com
info@ontechpartners.com
https://ontechnologypartners.com
216.920.3100