Do you have a question about the ILIFE-W150 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Ilife ILIFE-W150
Page 1
ILIFE-W150 Cordless Handheld Floor Washing Cleaner User Manual For more detailed information, please visit: www.iliferobot.com...
Page 3
English Dear Customer, Thank you for purchasing ILIFE W150 Cordless Handheld Floor Washing Cleaner! You've joined the millions of people who clean with robots - the smarter way to get it done. Please take a few moments to read this manual and get acquainted with your robot, to get the best performance from your robot.
English Table of Contents Safety Instructions ......................3 Product Introduction ....................5 List of Accessories ........................5 Introduction of Robot ......................6 Button Explanation .........................7 Light Effect Prompt .........................7 Voice Prompt ..........................8 Product Operation ......................9 Assembly ............................9 Assemble the Roller .......................9 Install the Charging Base ....................10 Charge ............................10 Install the Clean Water Tank .....................11 Take the Roller Out ......................11...
English Safety Instructions Warnings 1. This floor washing cleaner is a household product, and is not recommended for use in industrial, commercial or other severely dirty conditions. 2. To prevent project damage, please use the accompanying detergent if needed. 3. In order to prevent damage to the roller sponge, please do not clean sharp objects with this product.
Page 6
English Safety Instructions Service restrictions This product is designed for usage on Restrictions of Using only (such as tile, marble, wood,waterproof hard floors etc.). Please do not use the product to clean rugs or other non-waterproof floors. Note: This product is not suitable for rug or carpetcleaning.
English Product Introduction List of Accessories Handlebar Dirty Water Tank Clean Water Tank Cleanser Main Body Dock Charging Base Roller Cleaning Tool Power Adaptor User Manual Bolt Rubber Plug 1 X2 Rubber Plug 2 X2 For more detailed information, please visit: www.iliferobot.com...
English Product Introduction Introduction of Robot Power button Mode button Status indicator Mute button Direct charging port Power indicator Clean water tank Charging Port Dirty water tank For more detailed information, please visit: www.iliferobot.com...
English Product Introduction Button Explanation Turn on/ off: Push the power button gently to turn on the machine. Push it again to turn Turn on/ off the machine off. No-Water Sweeping Mode: Hold the power MAX button button for 3 seconds. After hearing “Tick”, please loose your hand from the button and the machine will begin with “Sweeping Mode”...
English Product Introduction Indicator light for working Product status Light status Charging The orange light blinks Charging completed The status indicator is off Working error (incl. the dirty water tank is not installed or the clean A fast blinking red light water tank or roller alarm has a problem) Voice Prompt...
English Product Operation Assembly Open the package and take out all the product accessories. Mount the handle on the machine and tighten the screws. Take out the roller. If it is dry and stiff, please soak it in water (under 50℃) and rub it evenly till it is completely soft.
English Product Operation Install the Charging Base Take the charging base component out from the package. Insert the plug of the charging base into the socket. Charge The orange light blinks during charging. The green light is on for 30s after charging.
English Product Operation Install the Clean Water Tank Please fill the clean water tank To prevent it tilting, please grab before using the product. Hold the the main body with your other square button on the top of the hand to keep it upright. water tank to unlock it and put your hand on the latch to pull the water tank out.
English Product Operation Auto-cleaning of Roller Put the main body on the charging base and quickly press the mode button for the roller to work automatically. Lock and Unlock Lock the main body Push the lower part of the main body forward slightly until you hear a “click”...
English Product Operation Unlock the main body Lift the product from the base and put it on the flat floor. Hold the handle and stabilize the mop with one foot. Then pull the main body backward gently until you hear a “click”, which indicates the main body is unlocked.
English Maintenance Clean the Roller First remove any entangled hairs Clean the sponge roller (use the before cleaning the roller. correct amount of soft detergent). Note: The active protection system is used to identify any malfunction during operation. When the system is activated, the product will immediately stop working to prevent damage.
English Maintenance Clean the Dirty Water Tank and Channel Clean the dirty water tank Push the button to open the cover. Put your hand on the slot of the dirty water tank to remove it. Open the cover on the side to Or push the latch on the dirty pour out the dirty water.
Page 18
English Maintenance After the dirty water is dumped The top cover needs to be out, put the tank back into the covered flat. mop. Note: Please grab the dirty water tank with your other hand to keep it steady and prevent spilling. Clean the channel Push the button to open the cover.
Page 19
English Maintenance The dirty water hole should be cleansed immediately if it spills during operation. The rubber cover may be removed to clean foreign matter if the channel is blocked. Rubber cover Note: of the channel Please disconnect the power Dirty water hole adaptor to stop charging before maintaining or cleaning...
English Maintenance Moving and Storage Store the product Please turn off the machine before storage. Lock the main body and put it back on the base. Please cleanse the interior of cleaning head before storage to prevent bacteria and make sure the clean water/dirty water tank is completely emptied.
English Troubleshooting Problem Solution Soak the roller in water till it is 1. The cleaning roller soft, and squeeze out any is not fully soaked. extrawater before installation. Check the installation button and 2. The cleaning roller the appearance of the cleaning is deformed or not roller to see if it is mislocated or installed correctly.
English Product Specification Item Detail Noise <65 dB Clean Water Tank Capacity 1000ML Dirty Water Tank Capacity 500ML Lithium Battery Capacity 3200mAh Rated Power Adaptor 0.6A Working Voltage 14.4V Charging Duration <360mins Size 300x230x1220 mm For more detailed information, please visit: www.iliferobot.com...
Page 24
How to join? Visit: www.iliferobot.com Go to Support Page Click on “Extend 6-Month Warranty” Share product image/video Welcome to share ilife product image/video and experience on social media by tagging us and using hashtage #cleanwithilife. You'll have chance to get featured.
Need help?
Do you have a question about the ILIFE-W150 and is the answer not in the manual?
Questions and answers