Sygonix 2615507 Overview

Overview for programming
RFID/fingerprint access system
Item no. 2615507
In the following tables, a reference to the chapter number of the main manual is given in the first
line to make it easier for you to find the detailed description.
Enabling/disabling programming mode (11.3)
Procedure
Enter programming mode
Exit programming mode
The master code is
Changing master code (11.4)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter new master code
4. Confirm entry
5. Enter new master code again
6. Confirm entry
7. Exit programming mode
The master code must consist of 6 digits.
Teaching in master fingerprint (11.5.1)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter memory cell number 99 for the
master fingerprint
4. Confirm entry
5. Read master fingerprint 3 times
6. Exit teach-in mode
7. Exit programming mode
Deleting master fingerprint (11.5.2)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter memory cell number 99 for the
master fingerprint
4. Confirm entry
5. Exit delete mode
6. Exit programming mode
Setting the Wiegand interface mode (11.6)
Procedure
1. Enter programming mode
2. Enter programming code
3. Choose mode
4. Confirm entry
5. Exit programming mode
Button combination/operation
(Master code)
by default (or after resetting to factory defaults).
Key combination/operation
(Master code)
(New master code)
(New master code)
Key combination/operation
(Master code)
(fingerprint) (fingerprint) (fingerprint)
Key combination/operation
(Master code)
Key combination/operation
(Master code)
= Use as an access system (or as a Wiegand control-
ler), factory default
or
= Use as an external card reader on a Wiegand
controller
Selecting access mode (11.7)
Procedure
1. Enter programming mode
2. Enter programming code
3. Select the access mode
4. Confirm entry
5. Exit programming mode
Saving user PIN (11.8)
Option 1: Automatically saving a user PIN in the next free memory cell (11.8.1)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter PIN
4. Save PIN
5. Exit storage mode
6. Exit programming mode
To save multiple user PINs one after the other, repeat steps 3 and 4.
Saving user PIN (11.8)
Option 2: Assigning a user PIN to a specific memory cell (11.8.2)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter memory cell number
4. Confirm entry
5. Enter PIN
6. Save PIN
7. Exit the storage mode
8. Exit programming mode
To save multiple user PINs one after the other, repeat steps 3 to 6.
Deleting user PIN (11.9)
First option: Deleting a user PIN (11.9.1)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter PIN
4. Delete PIN
5. Exit delete mode
6. Exit programming mode
To delete multiple user PINs one after the other, repeat steps 3 and 4.
Deleting user PIN (11.9)
Second option: Deleting a user PIN via memory cell number (11.9.2)
Procedure
1. Enter programming mode
2. Enter programming code
3. Enter memory cell number
4. Confirm entry
5. Exit delete mode
6. Exit programming mode
To delete multiple memory cells one after the other, repeat steps 3 and 4.
Key combination/operation
(Master code)
= Only with a fingerprint
or
= Only with a transponder
or
= Only with a PIN
or
= With a transponder and PIN
or
+ ( ..... ) = Multi-user access
Example: = The changeover contact is activated and
access granted only if 4 persons perform a valid access at-
tempt using a transponder strictly one after the other within
no more than 5 seconds per person
or
= With a PIN, transponder or fingerprint (default setting)
Key combination/operation
(Master code)
(enter PIN), 4 to 6 digits
PIN "8888" cannot be used!
Key combination/operation
(Master code)
(Memory cell number), from .....
(enter PIN), 4 to 6 digits
PIN "8888" cannot be used!
Key combination/operation
(Master code)
(enter PIN), 4 to 6 digits
Key combination/operation
(Master code)
(Memory number), optional .....