Installing The Range Hood - Samsung NK30CB700W Series Installation Manual

Installation
10 English
MANUAL INSTALL_Range Hood_DG68-01500A.indb 10 MANUAL INSTALL_Range Hood_DG68-01500A.indb 10
7. Remove the cover by loosening the
screw on the PCB cover.
8. Connect the connector of the electric
damper wire and the PCB connector.
NOTE
Insert the wire into the hole at the top
left corner.
9. Assemble the PCB cover using a
screw.
NOTE
Put the connected connector into the
hole of the cover as shown in the
picture.

Installing the Range Hood

10. Fix the hood to the hood mounting
bracket installed on the wall.
11. Fix the duct auxiliary bracket using
two 30 mm screw anchors in the top
left of the duct.
2023-01-05 오후 3:15:31 2023-01-05 오후 3:15:31