Charging/Operating A Usb Device (See Fig. C) - Parkside PAA 20-Li B2 Translation Of The Original Instructions

Charging/operating a USB device
(see fig. C)
NOTE
► If only a small current (<130 mA) is drawn, the
battery adapter switches off after a short time.
It is therefore not possible to charge or operate
such a device.
♦ Connect your USB device to the USB port
the battery adapter
♦ Press the ON/OFF switch
battery adapter
The control LED
lights up. The control LED
nently to indicate the power supply.
Your device can now be charged or operated on
the battery adapter
♦ To turn off the USB port
switch
The control LED
PAA 20-Li B2
.
flashes four times and then
again for around two seconds.
goes out after a short time.
.
to activate the
lights up perma-
.
, press the ON/OFF
GB │ IE
of
│
9 ■