Summary of Contents for Andel FilterSepta 2
- Page 1 FilterSepta 2 Installation and Operation Manual Andel Limited Unit 1 Dodworth Business Park South, Upper Cliffe Road, Dodworth, Barnsley S75 3SP Tel +44 (0) 1484 845000 Fax +44 (0) 1484 845222 www.andel.co.uk Filtersepta 2 28.01.2022 Rev.0 1...
-
Page 2: Table Of Contents
Connection To BundGuard Issue 5 Option 1 Control Panel ........8 Maintenance ........................9 Technical Details ......................9 Thank you for selecting the FilterSepta 2. This manual provides safety, installation, and operation information. Please, read before installing or operating the unit and retain for future reference. Filtersepta 2 28.01.2022 Rev.0... -
Page 3: Introduction
Introduction Andel Filtersepta 2 performs to the requirements of a Class 1 full retention oil/water separator and relevant sections of EN858-1:2002 – less than 5ppm hydrocarbons in water discharged, under test conditions. The Filtersepta 2 is designed to work in conjunction with a BundGuard unit to remove any small traces of oil, which may be present in the discharge from the BundGuard (“Yes to water! –... - Page 4 Filtersepta 2 28.01.2022 Rev.0...
-
Page 5: Installation
“1” position when refitting the lid. M20x1.5mm gland entry holes are provided in the sides of the junction box, fitting and tightening the gland removes the plastic lugs within the gland opening, therefore no drilling of the junction box is required. Filtersepta 2 28.01.2022 Rev.0... -
Page 6: Connection To Bundguard Issue 4 Control Panel
Connection to BundGuard Issue 4 Control Panel The A/B terminal will be provided with the FilterSepta unit. Filtersepta 2 28.01.2022 Rev.0... -
Page 7: Connection To Bundguard Issue 5 Standard Control Panel
Connection to BundGuard Issue 5 Standard Control Panel The A/B terminal will be provided with the FilterSepta unit. Filtersepta 2 28.01.2022 Rev.0... -
Page 8: Connection To Bundguard Issue 5 Option 1 Control Panel
Connection To BundGuard Issue 5 Option 1 Control Panel The A/B terminal will be provided with the FilterSepta unit. Filtersepta 2 28.01.2022 Rev.0... -
Page 9: Maintenance
Solvents and degreasers should not be used when carrying out maintenance as this will affect the separation performance. FilterSepta 2 units should be visually checked regularly to ensure there is no significant build-up of contaminants and actioned appropriately. The FilterSepta 2 units should be cleared of contaminants on regular intervals.
Need help?
Do you have a question about the FilterSepta 2 and is the answer not in the manual?
Questions and answers